Minolta MS6000 MK II Operator's Manual

2, 2 Introduction This instruction manual explains the operation of the Minolta Universal Carrier UC7. Read it carefully before using the equipment to ensure proper usage. The UC7 is designed for use with Minolta reader-printers and scanners. Specifications Product name: Minolta Universal Carrier UC7 M…

1, Universal Carrier UC7 Operator’s Manual Minolta Corporation, 101 Williams Drive, Ramsey, NJ 07446-1293, USA …

5, 5 Film loading Film • Set up guide rollers for either, 16 or 35mm. • Place full spool of film on left spindle. Always feed the film from the top of the spool. • Pull Carrier forward until cover glass is fully open. • Feed film under left guide roller, cover glass and righ…

8, 8 Maintenance The upper and the lower glass flats must be cleaned regularly for optimum performance. Remove lens from the reader-printer and set aside. Now the cover glass may be easily removed by lifting it out of the frame. It helps to pull the carrier halfway to the front for g…

4, 4 • Position receiver plate according to Fig.1. Slide carrier on to the receiver plate from the right side of the reader-printer. Make sure the carrier is pulled to its outermost end stop as Fig. 2 shows and the motor mount is on the left of lens holder. • Pull carrier forward without lifting…

7, Minolta MS6000 MK II 7 Operating Fiche Take hold of the handle of the carrier and pull forward as far as it will go. This will cause the upper glass to swing open. Slide Fiche onto the lower glass. COM Fiche: SOURCE Document Fiche: Place Fich…