MINOLTA-QMS 2300 DL Operation & User’s Manual

138, Repacking the Printer132 F. Remove the Transfer Belt 1 With the front door open and transfer belt release lever at its top (11 o’clock) position, unscrew the two thumbscrews. 2 Grasp the transfer belt and pull it straight out. 3 Place the transfer belt and thumbscrews in the protective ba…

160, MINOLTA-QMS 2300 DL Safety Information154 Laser Safety Label—CDRH Requirement CAUTION: Use of controls, adjustments, or performance other than those specified in this manual may result in hazardous radiation exposure . This is a semiconductor laser. The maximum power of the laser diode is 5 mW, and the w…

136, Repacking the Printer130 D. Remove the Waste Toner Bottle, Plug the Openings, and Dispose of It According to Your Local Regulations 1 Open the printer’s front door, grasp the waste toner bottle’s handle, and pull the waste toner bottle outward and upward. 2 Carefully remove the waste toner b…

29, Loading Media 23 Tray 2 (Optional Lower Feeder Unit Media Tray) Depending on which tray you have purchased, letter or A4 plain paper can be printed from Tray 2. 1 Slide the media tray open. 2 Push the media pressure plate down to lock it in position. 3 Load the paper face-up, short edge (o…

75, Cleaning the Printer 69 2 Clean the feed rollers by wiping them with a soft, damp cloth that has been wrung out well. 3 Close the duplex option door. Tray 2 (Optional Lower Feeder Unit) Media Rollers 1 Turn off the printer, unplug the power cord, and disconnect all interface ca…

78, Cleaning the Printer72 12 Hold the waste toner bottle vertically, and then move the two caps from the openings onto the cap holders. Turn the caps clockwise to secure them. 13 Set the bottom of the waste toner bottle into its compartment, and then push the top of the bottle into place. 14 S…