MINOLTA-QMS 4100E Operation & User’s Manual

152, MINOLTA-QMS 4100E Troubleshooting 10 PagePro 4100E 10-15 10.3 General printing problems Problem Possible cause Action No output The printer is not connected to the power supply, or the cable is not connected to the printer. Check the power connection and the interface connection to the printer. The printe…

4, PagePro 4100E TOC-3 4.4 Quality index card.......................................................................4-16 Optimizing data exchange with the printer (All raster) ..................4-17 Switching Toner Save function on and off.....................................4-17 Specifying the graphic…

154, Troubleshooting 10 PagePro 4100E 10-17 Status messages Status messages indicate the current condition of the printer. Lamps Meaning Lamps Meaning Printer is switched off Printer is ready for operation Printer is switched on and running a self-test Lamp flashes when printer is: • receiving da…

98, Working with the DOS printer tools 6 PagePro 4100E 6-13 Checking the status of a counter Resetting a counter This resets the counter status to zero "0". The “total counter“ status can only be reset by a customer service engineer. ➜ Click on the [RESET] button adjacent t…

87, 6 Working with the DOS printer tools 6-2 PagePro 4100E Switching on/off popup messages (Setup menu) Faults are quickly signalled by means of popup messages. If the printer malfunctions, a dialogue box containing an appropriate message automatically appears on the screen. ➜ Activate the check…

62, Working with the Windows printer drivers 4 PagePro 4100E 4-15 Scaling the printed document The print-out of a document may be enlarged or reduced by means of the “Scaling“ function. The “Scaling“ function cannot be used at the same time as the “N-up“ or “All raster“ f…