MINOURA HYPERMAG1200-LW Manual, Instructions

1, - 1 - RESOLUTION DIAGRAM HyperMag-1200-LW indoor bicycle trainer F-1 F-4 F-7 M8-4 M8-3 HF-3 HM-11 HM-12 HM-2 HM-8 HM-9 HM-13 HM-3 HM-7 HM-5 LM-13 F-1 : Coupling (Right) HM-2 : Flywheel Side Inner Case F-2 : Coupling (Left) HM-3 : Mag Side Inner Case F-4 : Coupling Cover HM-5 : Remote Ou…

2, - 2 - ! ! ! ! ! ! ! ! ! ! ! Remove the coupling protector cap when you use your own quick release skewer.Remove the coupling protector cap when you use your own quick release skewer. Remove the coupling protector cap when you use your own quick release skewer.Remove the coupling protector c…

3, MINOURA HYPERMAG1200-LW - 3 - How To Setup Your HyperMag1200 Trainer Insert the left side of the skewer (quick release lever side) into the left side coupling, and adjust the rotation of the coupling so the skewer lever sits securely in the large cut-out (see Fig. C). This will prevent damage to the skew…

4, - 4 - Increasing Load ForceIncreasing Load Force Increasing Load ForceIncreasing Load Force Increasing Load Force To increase the load force, turn the lever on your thumb shifter device toward the “H” symbol. (see Fig. E) (Fig. E) Decreasing Load ForceDecreasing Load Force Decre…

5, - 5 - 10mm Spanner Adapter Fitting Bracket 1 Remove two bolts which hold the Mag unit on the fitting bracket by an M5 hex wrench. Then the Mag unit will be removed. 2 3 Install the supplied “Z” shaped adapter on the fitting bracket with the removed bolts. Make sure the direction of the adap…