MINOURA TWIN - V1.1E Instruction Manual

4, Placing the Trainer on the Floor Fully open the legs and place on a at and horizontal oor. ! To open the U-Leg, grab the main frame and the rubber cap on the U-Leg. Do NOT pull the Alloy Leg Guide directly, otherwise it may be bent or damaged. Check that all 4 points are touching the oo…

6, How To Use Foot Pedal The Foot Pedal is a convenient device to engage/release the drive roller to/from the rear tire quickly, and it keeps the proper pressure of the drive roller to the tire without adjusting everytime you use the TWIN. To maintain the tire life as long as possib…

1, indoor bicycle trainer MAGTEQS TWIN instructions manual For More Information MINOURA U.S.A. MINOURA JAPAN (for U.S. residents ONLY) (for ALL customers) 1996 East Ave. Hayward, California 94541 U.S.A. 1197-1 Godo, Anpachi, Gifu 503-2305 Japan Phone: 1-510-538-8599 …

3, How To Install Mag Unit & Foot Step Required Tools: 1x 5mm Hex Wrench (supplied) 1x 10mm Spanner (not supplied) The Mag resistance unit and Foot Step now need to be installed to the frame. Attach the Foot Step onto the bracket on the Step-Bar rst, put the Mag unit over …

7, MINOURA TWIN - V1.1E Decrease Increase How To Operate Remote Shifter TWIN comes with a convenient remote shifter device. By installing it on your handlebar or stem, you can adjust the resistance level in 13 levels without getting off the bike. The plastic band is soft enough to t aero-shaped carbon hand…

2, How To Assemble U-Leg Required Tools: 2x 5mm Hex Wrench (supplied) 1 2 5 6 3 7 4 for 700C for 22"~26" 650C Choose the pivot hole for your bike size on the main pillar. Some 26" may t better in the upper hole. First, disassemble the pivot bolt. Remove the alloy sleeve a…