Mocomtech CDM-570 Installation And Operation Manual

157, CDM-570/570L Satellite Modem with Optional IP Module Revision 4 Front Panel Operation MN/CDM570L.IOM 6–33 6.12 (CONFIG) MASK Select Transmit, Receive, Reference, BUC or LNB using the ◄ ► arrow keys, then press ENTER. Note that the BUC and LNB choices are only applica…

391, CDM-570/570L Satellite Modem with Optional IP Module Revision 4 SNMP Interface MN/CDM570L.IOM 19.6 CDM-570/570L Private MIB The CDM-570/570L SNMP implements a common modem MIBs that contain all the modem specific parameters common to the 570/570L. In addition, the CDM-570L SNMP also …

162, Mocomtech CDM-570 CDM-570/570L Satellite Modem with Optional IP Module Revision 4 Front Panel Operation MN/CDM570L.IOM 6–38 If Upper is selected, the following sub-menu is displayed: Edit BUC Current Alarm Upper limit. This is accomplished by selecting the digit to be edited, using the ◄ ►…

403, CDM-570/570L Satellite Modem with Optional IP Module Revision 4 Appendix C MN/CDM570L.IOM FAST Code Rejected! (ENTER or CLEAR) C.2.4 Enable / Disable Demo Mode Control FAST Demo Mode as follows: a. Press CLEAR to return to the menu. b. Select Cnfg, then press E…

420, CDM-570/570L Satellite Modem with Optional IP Module Revision 4 Appendix E MN/CDM570L.IOM Note: The c: is the drive letter used in this example. Any valid writable drive letter can be used. CMD Prompt: At the command prompt (c:\>) type "MD temp" without quotes (MD stand…

32, Page 14 of 54 MN/CDM570L.AA4 Parameter Type Command (Instruction Code and Qualifier) Arguments for Command or Response to Query Description of Arguments Response to Command Query (Instruction Code and Qualifier) Response to Query D…