MSB Technology Nelson LINK DAC III Operation & User’s Manual

3, MSB Technology Nelson LINK DAC III Front Panel The front panel is quite simple with no user controls. LEDs indicate power, the input source, the sampling frequency and whether an option is installed and is active. Power - The blue power LED lights up any time power is applied. The LINK should always be left plugged in wi…

9, 9 DSP Headers 1 2 3 4 5 6 7 8 J18 J19 Ground Data Bit Clock L/R Clock M Clock Data Flag Ground Ground S/PDIF S/PDIF (inverted) Ground Digital Active Option 1 192 kHz Ground NORMAL POSITION OF LINK III JUMPERS Analog Filter Change The analog filters in the output stage can be adjuste…

11, Troubleshooting No “Source” indicated - Is the 132k upsampling feature on? Is the balanced input active? Both can result in no source LED lit. Next, check for bad cable, or cable plugged into the wrong output on the transport. No sound - Check that source is valid audio source. Change to …

5, Power Supply Upgrades This is supplied with an outboard desktop power supply. This supply does limit the sonics of the unit and the P1000 Power Base is really recommended . This heavy duty supply is based on a large triple wound toroidal transformer. It is intended to sit di- rectly under th…

12, The GOLD LINK DAC provides an unparalleled sound experience with virtually any available digital source. Four internal stereo DA converters give improved signal-to-noise and channel separation characteristics, providing outstanding signal quality to your preamplifier. The Gold ha…