Manual, Specifications for Sierra Monitor Corporation 3140-01 Smoke Alarm (1 pages)
Data: UPD 2nd November 2023
Sierra Monitor Corporation 3140-01 Smoke Alarm PDF Specifications (Updated: Thursday 2nd of November 2023 05:43:02 AM)
Rating: 4.1 (rated by 10 users)
Compatible devices: 3100-xx, FMM-100 Series, RE316 Series, 3600I, Flame Detector 3100, 34237, MCT-426, 1200C.
Recommended Documentation:
Text Version of Sierra Monitor Corporation 3140-01 Smoke Alarm Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 02 November 2023)
Model 3140-01
Flame Detector Tester
Sierra Monitor Corporation - 1991 Tarob Court, Milpitas, CA 95035 USA (408) 262-6611 (800) 727-4377 Fax: (408) 262-9042
www.sierramonitor.com Email: [email protected]
Description
The Model 3140 simulates a UV/IR flame
signature by emitting a steady state UV signal
and a modulated IR signal at a flicker frequency
of 5 to 10 Hz. This simulation will cause the
Model 3100 flame detector to report an alarm.
Like the Model 3100 detector the 3140 is
designed for use in Hazardous environments.
The Model 3140 is intended for use in those
applications where regular testing, as required
by NFPA 72, is performed or where the use of
a real fire is impractical. The 3140 is rated over
a wide operating temperature range for those
applications where Flammable materials may
be present.
Features
• Wide operating temperature range.
• Surfaces are smooth, non-shedding, and
scuff resistant.
• Conforms to the operational specification
for the Model 3100 Flame Detector.
• Generates an Industry Standard UV/IR
Signature for use with a variety of devices.
• Uses commercially available 9-volt batteries
(not a proprietary power module).
Specifications
Sensitivity Typically alarms a 3100 in 3
seconds when viewed on-axis @
2-15 feet
Housing Aluminum with Red Epoxy Paint
Power Standard 9-Volt Battery
Operating
Temperature
-40° to 85° C.
Operating
Humidity
10% to 90%.
Red LED A flashing LED indicates Operation
Spectral
Emission
Radiant UV energy in the 185 to
260 nm band and IR energy at 880
nm.
Basic Operation
Hold the Tester between 2 and 20 feet from the
Detector to be tested. Aim the Tester at the
Detector and press the button. The Red LED
will flash on and off and after approximately 3
seconds the detector will report an alarm. Note
that the detector must be in normal operation
(see the Detector's User Manual).
Recommended:
Eagle Eye, Essentials CE55CW13, PNC-950, CXC110
4120 series, 01335-2010-00, MFY784BDP, KN-COSM-ICA, Dual Series
-
120VAC Smoke Alarmwith Exit Light• 1285EDescriptionThe Kidde 1285E is a 120VAC powered ionization smokealarm with a safety light and 9V battery back up. Thispremium smoke alarm has the ability to function as astand-alone unit or in an interconnected system. TheKidde 1285E includes ...
Model & Doc Type: 120VAC 2
-
FSDR-XXX, SEFSDR-XXX, AND SSFSDR-XXX MODELS1 1⁄2 Hour Fire & Combination Fire Smoke Dampers Vertical and Horizontal MountPart #461868SAFETY WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the ins ...
Model & Doc Type: FSDR-XXX 7
-
Version: 1022100811 - 1 - Instruction Manual of ATL-930 Addressable Smoke Detector ------ Please read this Manual carefully before installing and using the product. ----- I. Product overview ATL-930 Addressable smoke detector (Detector hereunder) is a kind of photoelectric ...
Model & Doc Type: ATL-930 4
-
For your safetyInstallation and mounting of electrical devices may only be carried out by qualified electricians.Serious injury (e.g. caused by an electric shock), fire, or material damage are possible in case of improper mounting. Read these instructions thoroughly and observe t ...
Model & Doc Type: Dual Series 2
Operating Impressions, Questions and Answers:
