Multi-Link LineHunter Operation & User’s Manual

7, DIP SWITCH: There is a six position DIP switch that will enable/disable any phone lines connected to it (follow silk-screen on back panel for position selection). The DIP switch will also enable/disable a busy signal for outbound calls when the phone lines are not available. It is recommended to…

6, FUNCTION 2: Outbound Line Hunting - This configuration places emphasis on outbound traffic.  Up to 12 telecommunication devices are always in queue to hunt for one of 4 available lines, but only 4 ports will accept inbound calls. I ncoming traffic will NOT be routed. Incoming calls will will be …

4, OPERATIONAL NOTE: Operating with less than 4 Telephone Lines will diminish the inbound routing capabilities: (4 Lines = 12 Ports, 3 Lines = 9 Ports, 2 Lines = 6 Ports, 1 Line = 3 Ports). Unless all four telephones are operational, the vacant PRIMARY LINE PORT and its subordinate po…

2, Product Manual CONTENTS SECTION  PAGE 225 Industry Parkway - Nicholasville, KY 40356 - Ph. 800-535-4651  2 1 HOW THE LINE HUNTER WORKS 3 2 LINE HUNTER AUTO TEST 8 3 FEATURES 8 4 APPLICATIONS 9 5 SAFETY INSTRUCTIONS 1 0 6 INSTALLATION 1 2 7 TECHNICAL SPECIFICATIONS 1 2 8 FCC REGISTRATION 1 3…

13, Multi-Link LineHunter 8 FCC REGISTRATION This equipment complies with Part 68 and Part 15 of the FCC rules. On the bottom of this equipment there is a l abel that contains, among other information, the FCC Registration Number and Ringer Equivalence Number ( REN) for this equipment. You must, upon reques…