Navman A300 Operation & User’s Manual

15, A300 1-15 NAVMAN A300 - Setup 4.1.6 Set offset (set local time) This option lets you adjust the A300 to display local time*. You only need to do this once, unless operating the unit in a new time zone. (* By default the A300 displays GPS time. The A300 will perform all functions accurately…

16, A300 1-16 NAVMAN 4.1.7 Editing settings (overview) A300 - Setup KEY = press this button = press this button = press both buttons together settings editing details beep beep beep ON beep OFF set units (km/h) set units (mph) set units (km/h) set offset set 12hr set 31-12 set 24hr …

17, A300 1-17 NAVMAN 5.1 Modes Press to turn the power on and start normal operation. Press repeatedly to step through the modes (press and hold to cycle through the modes quickly). Modes are accessed in the order shown below. See subsequent sections for details about using diff…

21, A300 1-21 NAVMAN A300 - Normal operation 5.1.6 Clock mode Clock mode shows the current time and date. (Time is only displayed while GPS satellite signals are available. By default, GPS time is displayed. See section 4.1.6 for instructions on setting local time.) Access this mode If nec…

12, A300 1-12 NAVMAN A300 - Setup 4.1.1 Set time format Set 12hr or 24hr time display format. To access this option If necessary, press and hold to turn the power on and enter setup. Press repeatedly until the screen appears as shown above. To set time format 1) Press to start editing (tim…

20, Navman A300 A300 1-20 NAVMAN 5.1.5 Altitude mode This mode shows total accumulated altitude and the current altitude. Access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above. While in Altitude mode…