Navman TRACKER950 Installation And Operation Manual

26, 28 TRACKER950 CHARTPLOTTER Installation and Operation Manual NAVMAN The TRACKER950 has a number of advanced navigation features which are set up through this menu. We recommend that you become totally familiar with the operation of the unit using the default settings before making any ch…

24, 26 TRACKER950 CHARTPLOTTER Installation and Operation Manual NAVMAN To use the fuel features, first purchase and install the optional single or twin engine fuel kit. If a fuel kit is installed but this fuel screen does not appear, you must enable it by setting Num Engines to 1 or 2 and sett…

7, 9TRACKER950 CHARTPLOTTER Installation and Operation Manual NAVMAN 2 Operation 2-1 Front panel Keys Esc key The Esc key has three different uses: 1 To switch the unit on and off (see section 2-4). 2 When the main screens are displayed, press the Esc key to move to the next main screen (see s…

6, Navman TRACKER950 8 TRACKER950 CHARTPLOTTER Installation and Operation Manual NAVMAN Latitude and longitude Latitude and longitude are displayed in degrees and minutes: Navigation data Data displayed on the TRACKER950 has three-letter names. The boat is sailing from the start to the destination and…

27, 29TRACKER950 CHARTPLOTTER Installation and Operation Manual NAVMAN Satellite Status screen General Setup Backlight (16) Local time Ofst (0) NMEA output (OFF) Language (English) Navigation Setup Map datum (WGS84) North reference (Automag) Land Settings menu Natural features …

16, 18 TRACKER950 CHARTPLOTTER Installation and Operation Manual NAVMAN GoTo is a simple way of navigating straight to one place: to the cursor position or to a waypoint. To start the GoTo 1 In the Underway screen, zoom in or out until the boat and destination are visible. 2 Press the GoTo…