Supplementary Manual for NEC AccuSync 500 Cables and connectors, Cooktop (1 pages)
Data: UPD 10th October 2023
NEC AccuSync 500 Cables and connectors, Cooktop PDF Supplementary Manual (Updated: Tuesday 10th of October 2023 05:58:39 AM)
Rating: 4.2 (rated by 59 users)
Compatible devices: 700, Express5800/GT110b, VERSA SXI ENABLING THE IR PORT, RS232 CONTROL CODES RESIDENTIAL MODELS, XT5000, VERSA LX 256-MB MEMORY, NDRV-60, MultiSync LCD1850DX.
Recommended Documentation:
Text Version of NEC AccuSync 500 Cables and connectors, Cooktop Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 10 October 2023)
NEC Display Solutions of America, Inc.
PC Control Connectors and Cables for NEC Plasma and Projectors v2.1
NEC labels the connector for RS232C serial communication the “PC Control” port.
This PC Control port can be used for the following functions:
• Communication from an AMX, Crestron or Extron control system.
• Communication from a PC using the NEC PC Control Utility for basic projector control.
• Communication from a PC using the NEC Geometric Correction Tool for adjusting a projector to display an image on a
cylindrical, spherical or corner screen.
• Communication from a PC using the NEC Image Express Utility to send images to the projector for presentations as
well as basic projector control, projector lamp and error status or asset management. (These functions can also be
accomplished via LAN or USB with models that have a network interface, optional network PC card or USB interface)
NEC uses two types of connectors for the PC Control port, a D-Sub 9pin for larger projectors and a mini-DIN 8pin for smaller
projectors due to space constraints on those models.
Models with D-Sub 9Pin PC Control port:
GT1150/2150/5000/6000/6000R
LT280/380
MT1060/1065/1075
NP1000/2000/3150/4000/4001
VT770
PX-42VP5/42VM5/42VR5/42XM3/42XM4/42XM5/42XR3/42XR4/42XR5/42XP10/42XC10
PX-50XM4/50XM5/50XM6/50XR4/50XR5/50XR6/50XP10/50XC10
PX-61XM3/61XM4/60XM5/61XR3/61XR4/60XR5/60XP10/60XC10
A standard D-Sub 9P female to D-Sub 9P female “Null Modem” or “Cross” cable can be obtained at a local computer or
electronics store. A “Straight Through” cable will not work.
If you prefer to assemble your own cable, you can use the pin out information below.
D-Sub 9P Female D-Sub 9P Female
Pin 2 Pin 2
Pin 3 Pin 3
Pin 5
Pin 5
Pin 7
Pin 8
GND
GND
*Tie Pin 7 & 8 together at both ends of the cable if desired
TxD
RxD RxD
TxD
Pin 7
Pin 8
Note: The TheaterSync
uses a “Straight Through” D-Sub 9P Male to 9P Female cable.
Models with mini-DIN 8Pin PC Control port:
HT410/510/1000/1100
LT180
LT30/35
LT240/260/245/265
NP40/50/60
VT37/47/470/570/575/670/676/48/480/580/49/490/491/590/595/695/700
WT600/610
A cable can be purchased from NEC using the following part number. (Service P/N: 73499390)
If you prefer to assemble your own cable, use the pin out information below and the following tips. Soldering a mini-DIN
connector can be tedious. To simplify the cable assembly, you can purchase a MAC or Sun type keyboard/mouse cable
(mini-DIN 8P) at a local computer store. Cut a DIN connector from one end and attach a D-Sub 9P Female to that end using
the pin out below.
12
34
5
6
7
8
Note: Do not confuse Pins 1 & 2
on the mini-DIN 8P connector.
Pin 1 is below Pins 3 & 4 which
are offset to one side of the
connector.
Pin 2
Pin 3
Pin 5
Pin 7
Pin 8
Pin 7
Pin 1
Pin 4
D-Sub 9P Female
mini-DIN 8P Male
GND GND
RxD
RxDTxD
TxD
*Tie Pin 7 & 8 together if desired
NOTE1: It is recommended to set the projector to “Idle Mode” in the Setup menu for best Power ON response.
NOTE2: For long cable runs it is recommended to set communication speed to 9600 bps in the Setup menu.
Recommended:
K-26, MXP, SCC-C6407, KX-FLB883EX
L1918S, SignageSolutions 32BDL3510Q, HDVD-9BK, Mikromedia 4, ecomot200 DI6001
-
D70S/i/H Quick StartupInstallationRemove the D70 from its packaging and connect the plug or mini-USB at the back of the unit to a wall socket or to one of your computer’s USB ports.To start the D70, press the on/off button at the back of the unit (see connectors).On/off button (hold for ...
Model & Doc Type: D70S 2
-
E-mail: http://www.LGEservice.com/techsup.html COLOR MONITOR SERVICE MANUAL MODEL: L1918S (L1918S-BNQ/SNQ.A**MQP for LPL TLB2, A**SQP for HSD A01, A**RQP for HSD D10, A**OQP for LPL TLL1 & TLL3) **Sales Market CAUTION BEFORE SERVICING THE UNIT, READ THE SAFETY PRECAUTIONS IN THIS ...
Model & Doc Type: L1918S 44
-
17” Widescreen LCD FlatTV™Elegant design with enhancedpicture and soundEnhanced video performance• Crystal Clear III for natural images with enhanced quality • Active Control™ to optimize the picture, whatever the source• High Definition WXGA LCD panel for sharper display• ...
Model & Doc Type: 17PF8946/78 2
-
User ManualThe color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.The contents of this manual are subject to change without notice to improve quality.© Samsung ElectronicsSamsung Electroni ...
Model & Doc Type: U32R590CWU 42
Operating Impressions, Questions and Answers:
