NEC PowerMate ES SlimLine Series Manual, Configuration

Memory Upgrade
■
Maximum memory supported: 512 MB; 
minimum memory required: 32 MB.
■
Memory type and size can vary between sockets.
■
System supports 168-pin, 100-MHz non-ECC SDRAM modules 
in 32-MB, 64-MB, 128-MB, and 256-MB configurations.
Use NEC memory upgrade kits for the best compatibility with your
system. For memory compatibility information, call Technical Support.
■
Single- or double-sided DIMMS are supported.
■
No jumper setting required.
409-00065-000
PowerMate
®
ES SlimLine Series System Board Configuration
Note: See your 
PowerMate ES SlimLine Series User’s
Guide
for detailed option installation information.
Website: www.nec-computers.com
Technical Support: 800-632-4525
Secondary 
IDE Connector
Processor Socket
(Socket 370)
System 
Memory
Upgrade 
Sockets
Primary
IDE Connector
J4
Jumper
JP4
Jumper
JBAT1
Jumper
Processor Upgrade
See your user’s guide for detailed processor upgrade information.
JP3
Jumper
JKBV1
Jumper
Jumper Settings
J23
Jumper
BIOS Factory setting. Sets the system for 
Recovery normal operation. The BIOS uses current 
configuration information and passwords 
at power on.
To enable BIOS recovery for a corrupted 
system, remove the jumper. Wait 10 seconds.
Replace the jumper on pins 1 and 2.
Restores Safe BIOS settings as the 
default BIOS settings and loads the 
BIOS Setup at power on.
123
J4
123
J4
CPU Factory setting. 
Type Uses an Intel
®
CPU.
3
2
1
J23
Uses a Cyrix
®
CPU.
3
2
1
J23
CMOS Factory setting. Maintains system board 
Clear configuration in CMOS RAM 
with onboard battery.
Clears CMOS while system power is off.  
Return jumper to pins 1 and 2 before 
powering system on.
Caution: To prevent damage to the system board,
avoid clearing CMOS while power is on.
3
2
1
JBAT1
3
2
1
JBAT1
Keyboard Factory setting. Wakes up the system from 
Wakeup Suspend to RAM mode via the keyboard. 
Requires Windows 98 running in Advanced 
Configuration Power Interface (ACPI) mode.
Normal operation. 
Disables Keyboard Wakeup.
321
JKBV1
321
JKBV1
Onboard  Factory setting. Enables onboard audio.
Audio
Disables onboard audio. Use this 
setting if you install a sound card.
123
JP3
123
JP3
Save to Factory setting. Enables the
RAM Save to RAM function.
Disables the Save to RAM function.
JP4
JP4
409-00065-000  4/19/00 3:01 PM  Page 1

• 
  OEM PS-12

  OEM Subwoofer Manual (#ZGW8ZD)

  PS-12, 12, oem/ps-12.pdf

• 
  Razor RipRider 360

  Bicycle Guide #YU1IL3

  RipRider 360, 7, razor/riprider-360.pdf

• 
  Cisco AMP8050

  AMP8050 Switch - #PPHASP

  AMP8050, 134, cisco/amp8050.pdf

• 
  Sony 4-188-206-11(1)

  4-188-206-11(1) Blu-ray Player - #ZZ9I56

  4-188-206-11(1), 39, sony/4-188-206-11-1.pdf

• 
  Subaru 1998 Impreza

  Automobile Instruction #7ZVFX4

  1998 Impreza, 615, subaru/1998-impreza.pdf

• 
  National Semiconductor DAC121C085

  Motherboard DAC121C085 Guidance, #3KRC13

  DAC121C085, 16, national-semiconductor/dac121c085.pdf

• 
  Neogen Corporation AccuPoint 2 ATP

  Document (AccuPoint 2 ATP, #28999J)

  AccuPoint 2 ATP, 16, neogen-corporation/accupoint-2-atp.pdf

• 
  Mitsubishi MF-U160C

  Freezer User Guide #4682AT

  MF-U160C, 8, mitsubishi/mf-u160c.pdf

• 
  Emax BCF640

  Emax Document Cooktop BCF640 (#SR8GPT)

  BCF640, 12, emax/bcf640.pdf

• 
  Supermicro 5014C-T

  #8K48KQ: 5014C-T Guidance

  5014C-T, 108, supermicro/5014c-t.pdf

• Search YouTube Videos for NEC PowerMate ES SlimLine Series Device
• Search Google for NEC PowerMate ES SlimLine Series Information
• Search Photo of NEC PowerMate ES SlimLine Series in Google Images
• Search Twitter for NEC PowerMate ES SlimLine Series News