Data: UPD 26th January 2024
VTech LS6125 Cordless Telephone, IP Phone PDF Quick Start Manual (Updated: Friday 26th of January 2024 12:36:40 PM)
Rating: 4.8 (rated by 60 users)
Compatible devices: LS6375-3, vt2423, 2431 - VT Cordless Phone, 80-5735-00 - V-Tech VT5823 5.8GHz Cordless Phone, LS6225, qw2652, CS6928-2, CS6114.
Recommended Documentation:
Text Version of VTech LS6125 Cordless Telephone, IP Phone Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 26 January 2024)
Quick start guide
Install the telephone base and
charger(s)
Install the telephone base and charger(s) as
shown below.
Batte r y installation and
charging
Install the battery as shown below. After
installing the battery, you might be able
to make and receive short calls. For best
performance, charge the handset battery for
at least 16 hours before use.
NOTES:
Use only the power adapter(s) and
battery(ies) supplied with your VTech
telephone.
For complete feature instructions,
please refer to your user’s manual.
1.
2.
Outgoing announcement
The telephone is preset with a greeting that
answers calls with “Hello, please leave a
message after the tone.” You can use this
preset announcement, or replace it with
your own.
To record your own announcement:
Press ANNC while the telephone is not
in use and the system will announce
“Announcement. Press PLAY or press
RECORD.”
Pr e ss R EC O R D a nd t he sy ste m
announces, “Record after the tone. Press
STOP when you are done.”
After the tone, speak towards the
microphone at the bot tom front of
the telephone base from about nine
inches away.
Press /PLAY/STOP when nished.
The answering system will automatically
play the newly recorded announcement.
Press /PLAY/STOP to stop the playback
at anytime.
To play messages:
Press PLAY/STOP to play messages and
stop playback.
Press X /DELETE while a message is
playing to delete it.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the current
message.
Press VOL / to raise or lower playback
volume.
1.
2.
3.
4.
5.
•
•
•
•
•
IMPORTANT!
If your product is not working properly:
Refer to the Troubleshooting section of
the user’s manual.
Visit our website at www.vtechphones.
com or call 1 (800) 595-9511. In Canada,
go to www.vtechcanada.com or 1 (800)
267-7377.
•
•
96-006809-010-100
Telephone base
Telephone line cord
Electrical outlet
not controlled
by a wall switch
Telephone base
power adapter
(large)
Telephone
wall jack
DSL lter (not
included) required
if you have DSL
high-speed
Internet service
Charger
Charger
adapter
(small)
Make, answer and end a call
Make a call
Press /FLASH or .
Dial the number.
-OR-
Dial the number.
Press /FLASH or .
Answer a call
Press /FLASH, or any of the dialing
keys (0-9, #,
*
).
End a call
Press OFF/CLEAR or put the handset in
the telephone base or charger.
Activate the answering system
The answering system must be turned on
to answer and record messages. Press
ANS ON/OFF to turn the answering system
on or off. When the answering system is
turned on, it will announce “Calls will be
answered,” and the ANS ON/OFF light will be
on. When the answering system is turned off,
it will announce “Calls will not be answered,”
and the ANS ON/OFF light will be off.
1.
2.
1.
2.
•
•
1
2
FLASH
CLEAR
SELECT
MENU
CID
VOL
CHARGE light
3
4
for models LS6125/LS6125-2/
LS6125-3/LS6125-4/LS6125-5/
LS6126-3/LS6126-5
Plug the battery securely
into the plug inside
the handset battery
compartment, matching
the color-coded label.
Place the battery with the
label THIS SIDE UP
facing
up and the wires inside
the battery compartment.
Align the cover at
against the battery
compartment, then slide
it upwards until it clicks
into place.
Charge the handset by
placing it in the telephone
base or charger. The
CHARGE light will be
on when the handset is
charging.
Recommended:
DES-2212, 192, 0254, OmniBook 3100
DBC 220 01, 8039s, Yealink SIP-T42G, 9110, 40d120
-
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving an ...
Model & Doc Type: 00021397 2
-
FacsimileQuick Reference GuideModel No.KX-PW606DLKX-PW606DWKX-PW606DLMain unit:Portable handset: KX-PW606KX-PW616KX-FKN514Thank you for purchasing a Panasonic facsimile. This guide explains some basic features and operations, but not all of them. For further details, see the Japanese operating i ...
Model & Doc Type: KX-FKN514 24
-
How to Use This GuideThis guide provides brief instructions for the commonly used features available with the SUPERSET 410 telephone. Many of these features are accessed by using the function keys on your telephone. In the instructions in this guide, the function keys are represented ...
Model & Doc Type: SUPERSET 410 8
-
SwyxPhone D863QUICKSTARTHold down the key until the display backlight goes on or off. You must confirm the switching off with the “Yes” function key.To open the main menu, press the soft key “Menu”. Use the navigation buttons to navi-gate through the menu. Confirm selectio ...
Model & Doc Type: SwyxPhone D863 4
Operating Impressions, Questions and Answers:
