Newcon Optik NEWCON LRB 3000 PRO Operation Manual

1, Newcon International ltd. © 2005-2006 Printed in Canada Operation Manual LRB 3000PRO LASER RANGE FINDER BINOCULAR In USA: 2331 Superior Ave. Cleveland, OH 44114 In Canada: 105 Sparks Ave., To…

7, voltage of the primary 9-Volt battery drops below 7.2 Volts. At this point the System is still functional but the battery should be replaced as soon as possible. The System can operate at the voltage level above 7 Volt. The System remains in the active displaying state for 8 seconds after …

14, Mode Screen dis pla y 1) Standard 1 M A , , , Meter Degree Codes2) AM Go into su bmenu Code 1 A M Met e r Code 2 A M Ya r d Code 3 A M Deg re e Code 8 A M Code 9 A M Deg ree Code 10 A M Ya r d Not used Not used Not used Not used Auto Target Auto Target Go to ne…

10, Newcon Optik NEWCON LRB 3000 PRO 5.1. Preparing the device for operation. • Rotate counterclockwise and open the battery compartment cover (5) located between the objective lenses (fig. 1). • Insert one 9V Ni-MH battery into the battery compartment observing correct polarity. • Close the battery compartme…

11, • Cd12 – this mode sets the target selection to First. No other parameters of those, which were previously set, are influenced. • Cd13 – this mode sets the target selection to Auto. No other parameters of those, which were previously set, are influenced. • Cd14 …