Newcon Optik LRM 2500 Operation Manual

32, 28 10. CUSTOMER SUPPORT Should you experience any difficulties with your NEWCON OPTIK product, consult the enclosed manual. If the problem remains unresolved, contact our customer support department at (416) 663-6963 or toll free at 1- 877-368-6666. Our operating hours are …

22, Newcon Optik LRM 2500 18 Compass calibration (CI model only) If the System was exposed to a strong magnetic field or was not in use for a long time, the compass accuracy may diminish. To return the compass into working condition:  Select CALc from CAL menu  Keeping the unit horizontal…

16, 12 Factors affecting measuring distance Though maximum measurement distance depends on target reflectivity, weather conditions and other conditions, for most targets the unit will provide accurate ranging for up to 2,000 meters. Under good conditions a large size target can be measured up t…

19, 15 o Compass Only (C) 1 o Elevation Only (E) 1 o Speed Only (S) o Height Only (H) 1 o Speed + Distance (Sd) o Distance +Compass + Elevation (dCE) 1  Unit – allows the user to select units of desired measurements, o Distance from M to Y o Compass & Elevation …

15, 11 the battery is used up. You can still get readings, but the battery needs to be replaced soon. Using the Device The LRM 2500/2500CI operational procedures are design to allow the user to use most applicable options in the fastest time possible. To activate it, press and hold Acti…