Newer Technology miniStack MAX Owner's Manual

7, ➂ ➃ Turn the miniStack over and place the bottom on the work surface. Lift the top cover o of the miniStack, exposing the internal chassis. Untape the plastic bag with assembly screws from the inner chassis. Make sure that the hard drive you wish to install (sold separately) is handy …

16, Newer Technology miniStack Chapter 3 - Formatting ④ Your drive will appear similar to how Disk 1 does below. Notice that the space on the lower right reads as “Unallocated.” Right click in this space and choose “New Partition.” ⑤ The “New Parti- tion Wizard” will la…

9, Newer Technology miniStack MAX ➆ ➇ Turn the enclosure over onto it’s top again on a soft work surface. Use the remaining 2 Phillips screws from the plastic bag and insert them into the center of the drive enclosure above the Newer Technology label, securing the hard drive into the chassis. Replace the 4 Phillips screw…

20, Newer Technology miniStack Chapter 4 -Troubleshooting & Tips 4 TROUBLESHOOTING & TIPS 4.1 Troubleshooting Some of the most simple problems can be traced to power or connectivity issues. Verify that your cables (both ends!) are properly plugged into the computer and storage solution. …

12, Newer Technology miniStack Chapter 3 - Formatting ➃ ➀ Choose a name for the volume. You will need to repeat this step for each volume if you selected multiple partitions. ➁ Click on the Customize button and the following dialog box will appear: Choose the partition scheme ap…