Nissan 2005 Murano Owner's Manual

112, REPROGRAMMING A SINGLE HomeLink BUTTON To reprogram a HomeLink Universal Trans- ceiver button, complete the following. 1. Push and hold the desired HomeLink but- ton. Do not release the button until step 4 has been completed. 2. When the indicator light begins to flash slowly (after 20 seconds),…

153, HOW TO USE “FUEL ECON” BUTTON The average fuel consumption (MPG or L/100 km) and the distance to empty (DTE — MI or km) will appear on the screen when the “FUEL ECON” button is pushed. Average fuel consumption (Mpg or L/100 km) The average fuel consumption mode shows the avera…

301, Nissan 2005 Murano LOADING TIPS There are tie down hooks located in the cargo area. The tie down hooks can be used to secure cargo with ropes or other types of straps. 쐌 The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S. certi- fication label. 쐌 Do not load the front and rear axle …

229, The jack should be used on level firm ground. 2. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nuts until the tire is off the ground. 3. Carefully raise the vehicle until the tire clears the ground. To lift the veh…

16, FRONT MANUAL SEAT ADJUSTMENT — Passenger side WARNING After adjustment, gently rock in the seat to make sure it is securely locked. Forward and backward Pull the lever up 쎻 1 while you slide the seat forward or backward to the desired position. Release the lever to lock the sea…

202, Shift lock release If the battery charge is low or discharged, the shift lever may not be moved from the P (Park) position even with the brake pedal depressed. To move the shift lever, depress the brake pedal, remove the cover using a suitable tool and push the shift lock release button. The shi…