Nissan 4083 Installation Instructions Manual

1, 1 ’98-’99 Frontier – Kit# 4083 INSTALLATION INSTRUCTIONS 98-99 NISSAN FRONTIER 4 WD KIT # 4083 WARNING Installation of a Performance Accessories body lift will change the center of gravity and the handling characteristics of the vehicle. Because of the higher cent…

2, 2 ’98-’99 Frontier – Kit# 4083 1. Read all warnings and instructions completely and carefully before you begin. Check the kit for proper contents (refer to the part’s list). Only attempt to install this kit on the vehicle described above. If anytime during the…

3, 3 ’98-’99 Frontier – Kit# 4083 screws are accessed through the wheel well. Remove the four bolts that mount the front bumper to the frame. Remove the bumper from the vehicle. 13. Remove the tabs that hold the fender well flaps to frame. This will prevent flaps from b…

4, Nissan 4083 4 ’98-’99 Frontier – Kit# 4083 made earlier. One by one remove each bed-mounting bolt. Remove bed-mounting bolts, one at a time, apply Loctite, reinstall bolt and tighten to vehicle torque specifications. WARNING Failure to install the steering extension properly could result …

5, 5 ’98-’99 Frontier – Kit# 4083 securely. Replace the fuel cap. WARNING A certified welder should perform all welding. 30. Lengthen the transmission shift lever. Scribe a line along the side of the shift lever below the bend. Be extremely careful during this p…

6, 6 ’98-’99 Frontier – Kit# 4083 39. Double-check the vehicle. Check all mounting hardware to be sure that it is properly tightened. Check all wires, hoses, cables, etc. to be sure that there is ample slack. Check the vehicle electrical system. Start the vehicle. Ch…