Nissan 4073 Installation Instructions Manual

7, PARTS LIST it Transmission shifter extension bracket bracket racket n with holes es s olts lts hers ering extension lt /16" x 1" bolts bolts W " SAE washers Nu 7/16" nylock nuts M 4 #6 hose clamp…

3, WARNING Use extreme caution when working near fuel lines and fuel tank. Clean up spilled fuel immediately. Any spark could cause an explosion or fire resulting in serious personal and property damage. 18. Remove the screws that mount the fuel filler neck to the body. Loosen the h…

6, CAUTION All fasteners should be retorqued after 500 miles and after off road use. All body lift components should be visually inspected and fasteners retorqued during routine vehicle servicing. 47. Double-check the vehicle. Check all mounting hardware to be sure that it i…

4, We recommend the use of loctite or a similar adhesive on all steering hardware. 26. Using the new lower radiator support as a template, Mark the lower core support for alignment of the new support. Align the holes in the new bracket with the stock mounting holes. Mark the core supp…

5, Nissan 4073 tank. Using a #6 hose clamp, attach the small hose to the fuel tank. Reconnect the remaining small hose to the filler neck. Tighten all hose clamps securely. Install the screws that mount the filler neck to the body. Tighten securely. Replace the fuel cap. 37. Lengthen the transm…