Océ 9800 Operation & User’s Manual

34, 34 Océ 9800 Copier/Printer User Manual The ‘Folder’ can be combined with the ‘Copy Delivery Tray’ or ‘High Capacity Stacker’, connected to the upper delivery output. For more information, see ‘Folded copies (optional)’ on page 53. r. [24] Folded copies will be delive…

47, Basic copy jobs 47 Original delivery after scanning You can choose for delivery of the original at the front or the rear side of the scanner. Note: If you are copying thick originals or originals in a carrier sheet, it is recommended to use the output at the rear side of the scanner to ensure cor…

192, Océ 9800 192 Océ 9800 Copier/Printer User Manual Pen pen number [1-32 by 1], 1 pen width [0.12-16.25 by 0.01, 0.19 ] mm or [0.0025-0.6390, by 0.0001, 0.0074 ] inch rounded to the nearest available value which is device dependent pen pattern [1-32 by 1, 16 ] (16 = black) 1-16 are shade p…

195, Overview and tables 195 error number error type error name Controller errors: 20803 MRW Radical pba error. 20804 MRW SCSI pba error. 20806 MRW TAXI Scanner board error 20807 MRW Vector firmware checksum error 20808 MRW Vector extension checksum error 20809 MRW DRAM simm pba’s erro…

152, 152 Océ 9800 Copier/Printer User Manual Cleaning the reinforcement knives Because the knives of the reinforcement unit get sticky from the glue on the reinforcement tape it has to be cleaned regularly. Recommended is to clean it each time you have inserted a new tape roll (see…