Olivetti Fax_Lab 630 Instructions Manual

46, 44 7. To return the fax machine to its initial stand-by mode, press the key: 8. If you want to move back one function, press the key: note If you have confirmed the option "SILENT RX - DAILY", the fax machine will prompt you to enter the time at which it is to start a…

64, 62 1. Lower the handset and place it on a stable surface. 2. Open and lift the operator con- sole as indicated by the arrows. 3. Move the print cartridge carriage to the left-hand edge of the fax machine. 4. Release the paper feed roller by pressing the lever, as indicated by the arrow. 5. R…

70, Olivetti Fax_Lab 630 68 T TAD access code to change 34 to delete 34 to set 34 TAD configuration parameters to print 42 TAD console 33 Technical data characteristics of optical reader 65 communication characteristics 65 environmental conditions 65 general characteristics 65 power supply characteristics 65 reception cha…

55, 53 TO MAKE A TRANSMISSION REQUEST (POLLING RECEPTION) Arrange with your correspondent the time at which you intend to make the transmission request so that he has time to put the document to be sent in his fax machine. Then set up your fax machine to receive the document, by programming the…

49, 47 TO CHANGE THE LENGTH OF THE ACOUSTIC SIGNAL This function is only enabled in some countries. When the fax machine is set up for automatic recep- tion with recognition of the type of call, it behaves as follows: • if it is being called by a fax machine, it will automatically …