Olivetti Fax-Lab S95 Instructions Manual

34, Olivetti Fax-Lab S95 10 HOW TO READ THE REPORTS • Act. N. Progressive number of the transactions (transmission/reception) carried out. • Doc.N Reference number of document stored, assigned directly by the fax machine. • Type Type of transaction: TX for transmission. RX, RX POLLING for reception. • Dial…

49, 25 1. Lower the handset and place it on a stable surface (fig. 1). 2. Open and lift the operator console as indicated by the arrows (fig. 2). 3. Move the print carriage to the left-hand edge of the fax machine (fig. 3). 4. Release the paper feed roller by pressing the lever, as indicated by the arr…

43, 19 T ROUBLESHOOTING GUIDE W HAT HAPPENS IF THERE IS A POWER FAILURE If there is a power failure, the fax machine keeps the follow- ing data in the memory: the numbers set for one-touch and speed dialling and the reports, while the documents present in the memory will be lost. The …

32, 8 SPEED DIALLING Using codes (01-50) you can assign other fax numbers, telephone numbers and names which will be automati- cally dialled by pressing the key and typing the code. Follow the first two steps of the one-touch dialling proce- dure, then: 1. Press the key unt…

25, 1 T O SET IT UP FOR THE TELEPHONE LINE 1. Press the key until the display shows: INSTALLATION 2. Press the key: The display shows: TEL. LINE SET-UP 3. Press the key: The display shows: PUBL.LINE (PSTN) 4. To view the other available option, pres…

45, 21 S IGNALS AND MESSAGES Any problems that may arise are generally indicated by acoustic signals (accompanied, in some cases, by visual signals: error LED " " indicator on) or by error messages on the display. The fax machine also emits acoustic signals and shows mes- sages on t…