Specifications:593/593291-e1.pdf file (03 Mar 2024)
|
Omnitron Systems Technology E1 Network Card PDF User Instructions (Updated: Sunday 3rd of March 2024 07:24:12 AM)
Rating: 4.7 (rated by 36 users)
Compatible devices: iConverter T3/E3, Omnitron 8000-0, OmniRepeater 400, FlexPoint Powered Chassis 4385, Omnitron iConverter GX/TM2, iConverter T1/E1, FlexPoint 10FL/2, FlexPoint TR.
Recommended Documentation:
User Warranty Registration Please register on-line @ http://www.omnitron-systems.com or complete both sides and mail or fax this registration form to: Omnitron Systems Technology, Inc. 140 Technology Drive, #500 Irvine, CA 92618, USA Fax: (949) 250-6514 Name: _________________________________________________ Company: ______________________________________________ Address: ______________________________________________ ______________________________________________ City: ___________________ State: _______ Zip Code: ________ Country: _______________________________________________ Phone: ____________________ Fax: _______________________ E-mail: _________________________________________________ Please complete both sides of this form FlexPoint TM T1/E1 Copper to Fiber Converters User Instructions Description: The FlexPoint T1/E1 connects T1 and E1 devices, such as PBXs, CSUs and routers, via multimode (MM) or single-mode (SM) fiber. Designed to extend the standard T1/E1 twisted pair or Coax network distances over fiber, this converter provides protection from environmental noise and effectively increases high-speed network reliability. The following models are described here. Model # Fiber Type Max Distance 4470/90-x MM, SC, 1310nm 5km 4471/91-x SM, SC, 1310nm 30km 4472/92-x MM, ST, 1310nm 5km 4473/93-x SM, ST, 1310nm 30km 4474/94-x SM, SC, 1310nm, LH 60km Power Options (-x): -0 No power adapter included (chassis module) -1 110 Volt / 60 Hz -2 110-230 Volt / 50 Hz Mounting Options 4380 FlexPoint Wall-Mounting Hardware Kit 4384 FlexPoint 18 to 72VDC Stand-Alone Power Supply 4381 FlexPoint DC Converter Wall-Mounting Kit (for 4384) 4385 FlexPoint 14-Unit 48VDC Power-Redundant Chassis 4392 FlexPoint 5-Unit Rack-Mounting Shelf 4395 FlexPoint 14-Unit AC Power-Redundant Chassis Power Adapter Notice 1. When Using in a stand-alone configuration, this product is intended to be and must be used only with a Listed Direct Plug-In Power Unit marked “Class 2” and rated at 9VDC, 1 Amp. 2. This product should always be used only with Omnitron Supplied Power Unit model numbers 9113-PS or 9115-PS. WARNING! Before inserting the Power Adapter, verify that the power on the unit is appropriate for your AC line voltage source. Mounting instructions: The FlexPoint Fiber Converter can be solo-mounted using a wall-mounting kit, or rack-mounted using a 5-unit shelf, or a high-density FlexPoint 14-Unit Power-Redundant Chassis. Fiber Optic Cable Attachment: Connect the fiber cables between the FlexPoint T1/E1 converters. The transmit (Tx) must attach to the receive side and the receive (Rx) must attach to the transmit side. Note: Use fiber cables that are compliant with the specifications that are outlined in fiber cable specifications. Copper Cable Attachment: RJ-45/RJ-48 T1/E1 connector Connect to the RJ-45/48 connector on the FlexPoint T1/ E1 converter via a category 3 or better cable (Category 5 is recomended) and attach the other end to the network equipment. (The twisted pair connection requires two active pairs in a T1/E1 environment. The active pairs are pins 1&2 and pins 4&5. Only dedicated wire pairs should be used for the active pins.) Set the UTP DCE / DTE switch for the RJ-45/48 port to the appropriate setting. Note: Use copper cables that are compliant with the specifications that are outlined in copper cable specifications. Coax E1 Connector Attach the BNC to the FlexPoint T1/E1 converter and attach the other end of the BNC to the network equipment. Note: Use copper cables that are compliant with the specifications that are outlined in copper cable specifications. Switch Settings: UTP DCE/DTE setting The UTP DCE/DTE switch is used to eliminate the need for crossover and custom cables to connect devices together when using the RJ-45/48 port. Set this switch to DCE to use a straight-through cable and to DTE when a crossover-cable would be required. T1/E1 Copper line configuration settings The T1/E1 copper line codes and line lengths are configured using dip switches located on the side of the FlexPoint T1/E1 media converter. Line Type Port Type Distances Switch Positions 1 2 3 4 T1 DSX-1 RJ-45/48 0’ - 133’ LL LL L LL LL L LL LL L LL LL L T1 DSX-1 RJ-45/48 133’ - 266’ LL LL L LL LL L LL LL L KK KK K T1 DSX-1 RJ-45/48 266’ - 399’ LL LL L LL LL L KK KK K LL LL L T1 DSX-1 RJ-45/48 399’ - 533’ LL LL L LL LL L KK KK K KK KK K T1 DSX-1 RJ-45/48 533’ - 655’ LL LL L KK KK K LL LL L LL LL L T1 DS-1 RJ-45/48 0 dB LL LL L LL LL L LL LL L LL LL L T1 DS-1 RJ-45/48 -7.5 dB LL LL L KK KK K LL LL L KK KK K T1 DS-1 RJ-45/48 -15.0 dB LL LL L KK KK K KK KK K LL LL L T1 DS-1 RJ-45/48 -22.5 dB LL LL L KK KK K KK KK K KK KK K E1 75 Ω Coax/BNC Standard KK KK K LL LL L LL LL L LL LL L E1 120 Ω RJ-45/48 Standard KK KK K LL LL L LL LL L KK KK K E1 75 Ω Coax/BNC Extended KK KK K LL LL L KK KK K LL LL L E1 120 Ω RJ-45/48 Extended KK KK K LL LL L KK KK K KK KK K Operational switch settings and functions The following operational switches located on the front of the FlexPoint T1/E1 converter are to assist in installation and fault isolation. Local loop-back (L/LB) This switch will set the FlexPoint T1/E1 converter in a loop-back mode on both the fiber and copper connections. By returning the switch to the normal position the unit will resume to normal operation. Remote loop-back (R+L/LB) This switch will allow the entire fiber segment to be tested at either of the FlexPoint T1/E1 converters without having to set switches on both units. When set in this mode the local unit is switched to a local loop-back mode. The fiber Tx port will be further encoded to carry a remote loop-back protocol. This remote loop-back will set the far end FlexPoint T1/E1 converter to remote loop-back mode and return a signal to the sending unit. An LED on the local and remote FlexPoint T1/E1 converters will show a confirmation that the fiber segment is communicating properly between devices. By returning the switch to the normal position it will return to normal operation. DCE Twisted Pair #1 Twisted Pair #2 RTIP RRING TTIP TRING RTIP RRING TTIP TRING 1 2 4 5 DTE Twisted Pair #1 Twisted Pair #2 RTIP RRING TTIP TRING RTIP RRING TTIP TRING 1 2 4 5 Local Dual Loop Back Remote & Local Loop Back Force 1’s to Fiber Force 1’s Copper Normal Cu-Rx Cu-Tx FO-Tx FO-Rx Loopback Enabled Cu-Rx Cu-Tx FO-Tx FO-Rx FO-Rx FO-Tx Cu-Tx Cu-Rx Remote Loop Request Over Fiber Copper Cable Specifications: Twisted-Pair cable for T1 Gauge 22 to 24 AWG Impedance 100 Ω + 10% Impedance characteristic 2.6 dB / 100m @ 1.0 MHz Maximum distance 6,000 ft Twisted-Pair cable for E1 Gauge 22 to 24 AWG Impedance 120 Ω + 10% Impedance characteristic 2.6 dB / 100m @ 1.0 MHz Maximum distance 8,000 ft Coax cable for E1 Gauge 22 to 24 AWG Impedance 75 Ω + 10% Impedance characteristic 2 dB / 100m @ 1.0 MHz Maximum distance 8,000 ft For product specifications refer to the product data sheet. Technical Support: For help with this product, contact our Tech. Support: Phone: (949) 250-6510 Fax: (949) 250-6514 Address: Omnitron Systems Technology, Inc. 140 Technology Drive, #500 Irvine, CA 92618 USA E-mail: [email protected] URL: http://www.omnitron-systems.com Local loop-back and Remote loop-back When both Local and Remote Loop-back are set to the Normal position, the FlexPoint T1/E1 uses the default B8ZS data format. When both switches are turned to their On position, it uses the AMI data format. Transmit/force 1’s to fiber This switch is used to insert an “all ones” pattern into the data stream being transmitted out of the fiber port on the FlexPoint T1/E1 converter. Data being received on the coax or twisted pair will be disabled and data being received on the fiber is passed through to the coax or twisted pair side. By returning the switch to the normal position the unit will resume to normal operation. Transmit/force 1’s to Coax or UTP This switch is used to insert an “all ones” pattern into the data stream being transmitted out of the coax or twisted pair on the FlexPoint T1/E1 converter. Data being received on the fiber will be disabled and data being received on the coax or twisted pair is passed through to the fiber side. By returning the switch to the normal position the unit will resume to normal operation. Alarm Relay Contacts The FlexPoint T1/E1 features dry relay contacts for optionally connecting the it into a separate T1/E1 alarm circuit. The relay closes when a loss of power or when signal detect is lost to the copper or fiber connection. Operational rating on relay pins 3 & 6: 0-220VDC max 2A LED Indicators LED Color Status Description Power: Yellow On Power applied Fiber: Green Off No signal detect On Signal detect Blink All ones received UTP/Coax: Green Off No signal detect On Signal detect Blink All ones received Test: Green Off Normal operation On L/LB or All 1’s Test mode Blink R+L/LB Received master Fast Blink R+L/LB Received slave Fiber Cable Specifications: Multimode Cable: 50/125, 62.5/125, 100/140 μm Wavelength: 1310nm Max Distance: 5km Singlemode Cable: 9/125 μm Wavelength: 1310nm Max Distance: 30km Singlemode long-haul Cable: 9/125 μm Wavelength: 1310nm Max Distance: 60km Warning The operating description in this Instruction Manual is for use by qualified personnel only. To avoid electrical shock, do not perform any servicing of this unit other than that contained in the operating instructions, unless you are qualified and certified to do so by Omnitron Systems Technology, Inc. Caution All user-required operations can be performed without opening the unit. Never attempt to open or remove the cover or tamper with the unit. Warranty This product is warranted to the original purchaser against defects in material and workmanship for a period of TWO YEARS from the date of shipment. A LIFETIME warranty may be obtained by the original purchaser by REGISTERING this product with Omnitron within 90 days from the date of shipment. TO REGISTER, COMPLETE AND MAIL OR FAX THE REGISTRATION PORTION OF THIS INSTRUCTION MANUAL TO THE INDICATED ADDRESS. Or you may register your product on the Internet at http://www.omnitron- systems.com. During the warranty period, Omnitron will, at its option, repair or replace a product which is proven to be defective. For warranty service, the product must be sent to an Omnitron designated facility, at Buyer’s expense. Omnitron will pay the shipping charge to return the product to Buyer’s designated US address using Omnitron’s standard shipping method. Limitation of Warranty The foregoing warranty shall not apply to defects resulting from improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-supplied equipment, Buyer-supplied interfacing, unauthorized modifications or tampering with equipment (including removal of equipment cover by personnel not specifically authorized and certified by Omnitron), or misuse, or operating outside the environmental specification of the product (including but not limited to voltage, ambient temperature, radiation, unusual dust, etc.), or improper site preparation or maintenance. No other warranty is expressed or implied. Omnitron specifically disclaims the implied warranties of merchantability and fitness for any particular purpose. Exclusive Remedies The remedies provided herein are the Buyer’s sole and exclusive remedies. Omnitron shall not be liable for any direct, indirect, special, incidental, or consequential damages, whether based on contract, tort, or any legal theory. Form: 040-04470-002D 11/07 Relay 3 6 RJ-45/RJ-48 User Warranty Registration Please register on-line at http://www.omnitron-systems.com or complete both sides and return this form to Omnitron Systems. Model:_________________________________________________ Serial Number: ______________ Purchase Date: ______________ Purchased From: _________________________________________ Address: ______________________________________________ City: ___________________ State: _______ Zip Code: ________ Country: _______________________________________________ Comments and Suggestions: _______________________________ ______________________________________________________ ______________________________________________________ Please complete both sides of this form
8630741 Inverter - #9J38UO
8630741, 40, pro-point/8630741.pdf
Vacuum Cleaner AG-2095 Guidance, #5RKEU9
AG-2095, 13, anex/ag-2095.pdf
#543S66: CanoScan D1230UF Guide
CanoScan D1230UF, 14, canon/canoscan-d1230uf.pdf
Guidance (SDL100, #734S9I)
SDL100, 11, extech-instruments/sdl100.pdf
Security Camera EBH5102 User Guide, #396925
EBH5102, 21, everfocus/ebh5102.pdf
Omega Power Supply Manual (#4JG68D)
Omega Pro 80600, 5, omega/omega-pro-80600.pdf
Xerox Tutorial All in One Printer DocuColor 2240 (#96P664)
DocuColor 2240, 4, xerox/docucolor-2240.pdf
Instruction (DWR-1900 Series, #W178G6)
DWR-1900 Series, 28, kansai/dwr-1900-series.pdf
Yamaha Guide: RM1608 (#L6NVN8)
RM1608, 16, yamaha/rm1608.pdf
AGA marvel Guidance: ML15CL (#C97B3M)
ML15CL, 96, aga-marvel/ml15cl.pdf
* WITHSTANDING VOLTAGE BETWEEN L1 & L2 1.5KV 1 MINUTE* GOOD DIFFERENCE IN WINDING L1 & L2 INDUCTANCE0.831.0Max.13.0 0.326.0 Max.19.0 Max.3461613410.0 0.34.0 1.0Mechanical Dimension:oAT 25 C, 40KHz/1V Tested:DELTA ELECTRONICS, INC. (TAOYUAN PLANT CPBG)Schematic :LFZ24V Ty ...
Model & Doc Type: Suppression Inductors LFZ24V 1
LPe12000/LPe12002ConneCtivityStreamlined installation and management, unrivaled scalability, and industry-leading virtualization support make the single-channel Emulex LightPulse LPe12000 and dual-channel LPe12002 8Gb Fibre Channel (8GFC) Host Bus Adapters (HBAs) ideal solutions for enterprise ...
Model & Doc Type: LightPulse LP10000ExDC-E 2
CWPAC December 2010 Technical Specifications ControlWave® PAC Process Automation ControllerThe ControlWave® PAC is a highly adaptable Process Automation Controller with exceptional networking capability. Designed with an emphasis on scalability and modularity, the ControlWave PAC can be con ...
Model & Doc Type: Bristol ControlWave PAC 10
◈ Information This Installation Guide includes a brief outline of information necessary for product installation. For more detailed installation information, please refer to the user manual in the enclosed CD. The contents of the CD include the following. 1. Manual: User Man ...
Model & Doc Type: Bixolon SRP-270 8
# | Brand | Model | Document Type/File | Pages | File Size | Last Checked |
---|---|---|---|---|---|---|
1 | Emprex | Network Device DVDRW 2016UI |
18 | 0.29 Mb | 04/12 | |
2 | Panasonic | WJNT104 |
20 | 25/12 | ||
3 | StarTech.com | PCI EXPRESS SERIAL ADAPTER PEX4S952 |
8 | 0.32 Mb | 12/10 | |
4 | NETGEAR | PA301 |
21 | 04/04 | ||
5 | Sony | PCWA-C300S - Wireless Lan Pc Card |
1 | 0.07 Mb | 21/01 | |
6 | National Instruments | VXI-USB |
61 | 09/12 | ||
7 | HP | USB Media Docking Station |
69 | 28/03 | ||
8 | Motorola | SVG2500 |
175 | 25/03 | ||
9 | Cabletron Systems | SPECTRUM 1800 |
232 | 1.48 Mb | 08/01 | |
10 | LST | BC06-1 |
4 | 08/01 |
# | Brand | Model | Document (PDF) | Pages | Size | Check Date |
---|---|---|---|---|---|---|
1 | HAMPTON BAY | 44 in Hawkins |
13 | 0.94 Mb | 21.03.2024 | |
2 | Electro-Voice | ZXA5-60 |
4 | 0.51 Mb | 02.04.2024 | |
3 | Whirlpool | GZ5730XRB1 |
1 | 0.08 Mb | 04.02.2024 | |
4 | Geemarc | CL Bluehook |
34 | 0.13 Mb | 03.03.2024 | |
5 | M-Audio | ProSessions 24 |
4 | 22.10.2023 | ||
6 | Lenovo | ideapad 310S |
79 | 10.03.2024 | ||
7 | Audicus | aSwing |
24 | 02.11.2023 | ||
8 | NEC | 24WMGX³ |
2 | 16.10.2023 | ||
9 | LG | LRE30453SB - 30in Electric Range |
36 | 06.04.2024 | ||
10 | Panasonic | DMC FS15 - Lumix Digital Camera |
120 | 16.11 Mb | 22.10.2023 |