Optiview MPEG-4 Operation & User’s Manual

4, User’s Manual 4 Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for mi…

28, User’s Manual 28 Follow the steps to playback video from Event List. • Press and hold UP / DOWN to scroll through the Event List. • Press ENTER to play back the selected event record. • Press PLAY/STOP to return to live mode. 4.4 Video Export The unit allow…

14, User’s Manual 14 3.1 Front Panel Introduction The front panel controls enable user to control the unit and preset the programmable functions. 3.1.1 LED Definition The MPEG-4 DVR LEDs on the front panel are described as follows. IR LED (Green) The L…

17, Optiview MPEG-4 User’s Manual 17 3.2 Power Up / Down the Unit If you must shut down the MPEG-4 DVR for any reason, please use the proper shut down and power up procedures to avoid damaging your DVR unit. To Power Up the Unit Check the used type of power source before plug in your DVR first (the…

10, User’s Manual 10 The unit utilizes heat-conducting techniques to transfer internal heat to the case, especially to the bottom side of the unit. NOTE: Be sure not to remove the rubber feet, and always leave a space for air ventilation on the unit’s botto…

34, User’s Manual 34 Zoom In Use to zoom the dome camera in. This function is for user to choose the viewing area, more or less of it. ESC Use to leave dome control mode and return to live and full screen viewing mode. Auto / Enter • In OSD Menu mode, the …