* Lamp life is dependent upon many factors, including lamp mode, display mode, usage, environmental conditions and more. Lamp brightness can decrease over time.
Display Type
Single 0.55” DMD DLP Technology by
Texas Instruments
Native Resolution
Native XGA (1024 x 768)
Maximum Resolution
UXGA (1600 x 1200)
Brightness (Typical)
3000 ANSI Lumens
Contrast Ratio
3000:1 (Full On/Full Off)
Lamp Life and Type
6000/3000 Hours (Standard/Bright)
200W
Throw Ratio
1.95 to 2.15:1 (Distance/Width)
Projection Distance
3.28’ to 32.8’ (1.0 to 10m)
Image Size (Diagonal)
22.9” to 300” (0.58 to 7.62m)
Aspect Ratio
16:10, 16:9 and Native 4:3 Compatible
Horizontal Scan Rate
15.3 - 91.1 KHz
Vertical Refresh Rate
25 - 85Hz, 120Hz
Offset
115%
Keystone Correction
±40° Vertical
Displayable Colors
1.07 Billion
Uniformity
85%
Audio
2-Watt Speaker
Remote Control
IR Remote
Computer Compatibility
HD, UXGA, WXGA, SXGA+, SXGA, XGA,
SVGA, VGA Resized, VESA, PC and
Macintosh Compatible
Video Compatibility
NTSC, PAL, SECAM, SDTV (480i), EDTV
(480p), HDTV (720p, 1080i/p)
3D Compatibility
120Hz Frame Sequential 3D for Resolutions
Up to 720p, 60Hz Field Sequential 3D for
Resolutions Up to 480i
Monitor Loop Through
D-Sub 15 Pin VGA Output (Functional in
Both Normal and Standby Modes)
Projection Lens
F= 2.41-2.55, f = 21.8-23.98mm, 1.1x
Manual Zoom and Focus
User Controls
Complete On-Screen Menu Adjustments in
23 Languages
I/O Connectors
HDMI, VGA-In, VGA-Out, S-Video,
Composite Video, Stereo Audio-In, Stereo
Audio-Out and RS-232
Security
Kensington® Lock Port, Security Bar and
Keypad Lock
Projection Method
Front, Rear, Ceiling Mount, Table Top
Weight
5 lbs (2.27kg)
Power Supply
AC Input 100-240V, 50-60Hz,
Auto-Switching
Operating Temperature
41 to 104°F (5 to 40°C), 85% Max Humidity
Dimensions (W x H x D)
11.28” x 3.98” x 7.6”
(287 x 101 x 193 mm)
Noise Level (Standard/Bright)
29dB/35dB
Power Consumption
247 Watts (Bright), 200 Watts (Standard),
<5 Watts (Standby-Active), <1 Watt
(Standby-Eco)
Warranty
1 Year Limited Parts and Labor,
90 Days on Lamp
Standard Accessories
AC Power Cord, VGA to VGA Cable,
Remote Control, Batteries for Remote,
Carrying Case, Lens Cap, Multilingual
CD-ROM User’s Manual, Quick Start Card
and Warranty Card
Optional Accessories
HDMI Cable, Ceiling Mount, VGA to
Component Cable, S-Video Cable,
Composite Video Cable, RS-232 Cable and
Panoview™ Series Screens
UPC
796435 41 663 8
Accessory Part Numbers
Lamp: BL-FU185A
Remote: BR-3043N
Mount: BM-5001U
© Copyright 2010 Optoma Technology, Inc. DLP
®
and the DLP logo are registered trademarks of Texas Instruments. All specifications subject to change at any time.
www.optoma.com
Datasheet – PRO260X
PRO260X − Multimedia Projector
High Brightness, Long Lamp Life
The Optoma PRO260X provides the unique combination of high brightness and
long lamp life. Rated at 3000 ANSI lumens in high bright mode, the projector can also
be set to an energy-saving economy mode to lower power consumption and extend
lamp life up to 6000 hours. The PRO260X also features the latest technologies including
HDMI input, quick on/off and the ability to display 3D content when connected to a
3D-capable computer.
* 3D content can be viewed with active LCD shutter glasses when the projector is
connected to a computer with a compatible 3D graphics card.
Please visit www.optoma.com for more information.
Features
Native XGA DLP® by Texas Instruments with BrilliantColor™ Technology
Bright images and high contrast ratio – 3000 ANSI lumens and 3000:1 contrast ratio (full on/full off)
Rapid power-on and shutdown – saving you time and money
Filter-free design means low cost of ownership
High-definition resolution supported
Wide range of connectivity options: HDMI, VGA-in, VGA-out, s-video, composite video, stereo
audio-in, stereo audio-out and RS-232
Specifications
