Oricom TP150 Operation & User’s Manual

23, 22 9.4 Cleaning and care The surface of the case can be cleaned with a dry, soft, lint-free cloth. Never use cleaning agents, particularly aggressive solvents. Apart from occasional cleaning of the case, no other care is necessary. The rubber feet of the base station are not resistant …

21, 20 9 Important Information 9.1 Periodic testing Remote Pendant We recommend you check and test the remote pendant and SOS button function every month. To ensure that it is working correctly. The remote pendant battery should last for up to 2 years but we recommend changing it every 12 months or so…

12, 11 5.7 To mute the microphone During a call press and hold down the MUTE button to mute the microphone on the handset and base. Release the button to resume speaking to the caller. 5.8 Pause If needed for phone banking or behind a PBX system. You can insert a 3.6 seconds pause while diali…

22, Oricom TP150 21 9.2 Battery Backup on the phone base The TP150 requires that 4 AA Alkaline batteries be fitted in the phone and the power adaptor be connected to mains power socket and be turned on at all times. The Battery warning symbol on the phone display will indicate when the 4 AA batteries in …

19, 18 8. Caller ID Important: To use Caller ID functions the CLIP symbol must be on. If the CLIP symbol is not visible on the display, press the CID button once. 8.1 Receiving a Call (Can be stored up to 64 calls) • If an incorrect, invalid or incomplete Caller ID signal is received, t…

7, 6 3.4 Wall Mounting Method A. To fit to an existing telephone wall plate with modular connector simply, 1. Press and lift out the handset holder on base. Rotate it 180°, and snap it into place (see A) so it will hold the handset in place when the phone is mounted on the wall. 2. Inser…