PI Manufacturing 6919 Installation And Operation Manual

57, B.5 MAC Address Filtering This Access Point provides MAC Address Filtering, which prevents the unauthorized MAC Addresses from accessing your wireless network. Parameter Description Enable Wireless Access Control Enable or disable the MAC Address Filtering funct…

28, Chapter 4 Choosing a Mounting Location 4.1 Antenna Polarization The integrated antenna radiates and receives vertically polarized radio signals. Polarization helps reduce interference because the antenna tends to reject cross-polarized signals from other sources. a. Po…

20, PI Manufacturing 6919 Step 9. To set P2P (point to point) mode Choose the item- Basic Setting，to select “Mode” → ” AP Bridge-Point to Point” . After you do, you will see the following screen. To select “AP Bridge-Point to Point” To select “Channel 11” Ke y in another’s…

34, B.2 Wireless Setting This Access Point supports AP, Station, Bridge, WDS and Universal Repeater modes. “AP Mode” provides pure access point function. The simplest way to build up a wireless LAN is to use “AP Mode”. “Station Mode” is used to let a network device with only wi…

10, 1.5 The 6900 series Package Content Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials, in case of return; the device must be shipped in its original package. Outdoo…

23, Step 7. After you login, you will see the following screen. Step 8. Check Status Choose the item-HOME. After this step, you will see the following screen, IP Address AP MAC Address 22 …