Planar E2c Quick Reference Manual

3, Planar E2c 3 Check the contents of your Dome E2c display package for all the items shown here. Save the original packaging materials for storage and shipping. Unpacking the Display Power adapter Video card Power cord Software CDs DVI cable Also included: Composite Video, S-Video, and VGA cables. Dome E2…

7, 7 Connecting the Display To connect the display 1 Plug one end of the DVI signal cable to the DVI port on the display. Tighten the thumbscrews to secure the connection. 2 Plug the power cord into the power connector on the connector plate. 3 Plug the other end of the DVI cable into the…

2, 2 System Requirements • Intel Pentium 4/Xeon; AMD Athlon 64/K7/XP or compatible • PCI Express x16 lane slot • 50 MB hard disk space • 256 MB RAM • CD-ROM drive • Power supply, 350 watts or greater • Windows XP or Windows 2000 with Service Pack 4 or higher Read all …

11, 11 Use a dry, clean, lint-free cotton cloth to remove surface dust from the display screen. Do not use chemically treated dust cloths. To remove grease or organic contaminants, follow this procedure: 1 Disconnect the power supply from the display. 2 Dampen a soft, clean cloth…

10, 10 Handling the Display • Set up your display on a stable, level surface away from any direct light or heat source, but near a grounded AC outlet. • Choose a well-ventilated location with an adequate amount of space. Do not block the vents on the back of the display. • …

9, 9 Use the Display Properties dialog to make changes to the video settings or to set up dual-display con guration. To set the display orientation 1 Right-click the desktop and select Properties > Settings. 2 Select the monitor that you want to change. Then click Advanced. 3 Click the…