Planar PT1945R Operation & User’s Manual

28, PT1945P Driver Install Instructions: If you are using a PC running, Windows® 7/8, VISTA, XP, 2000, follow the instructions below: 1. Power on the PC. 2. Make sure that the USB cable is connected to the computer. 3. Visit www.planar.com/support. 4. Follow the step-by-step instructions as…

10, Connecting the Display (Figure 8.1) To setup this display, please refer to the following fi gure and procedures. 1. Be sure all equipment is turned off. 2. Connect the AC power cord to the power connector on the monitor and the other end into an electrical outlet (8.1). 3. Connect…

27, Planar PT1945R When changing the Touch Interface (RS-232 or USB), please follow instructions below. 1. Uninstall the touch driver. 2. Re-start the computer. 3. Remove the original Touch Interface (RS-232 or USB). 4. Connect the computer to the Touch Interface (RS-232 or USB) that you w…

18, Appendix Troubleshooting If you are experiencing trouble with the display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. ► Check that all the I/O and power connectors are correc…

30, Planar Systems, Inc. Customer Service 24x7 Online Technical Support: http://www.planar.com/support 1195 NW Compton Drive Beaverton, OR 97006-1992 Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the United States. Hours: 24 hours a day, 7 days a week © 2013 Planar Systems, Inc. 1…