Planex BT-03HS Operation & User’s Manual

7, 2. The Headset cannot be activated after being charged for 20 minutes. To activate the Headset, it needs to charge the battery at least for 40 minutes. However, it is highly recommended to fully charge the battery before use. 3. No indication of charging is shown. For the Headset…

10, A: 1) The headset may have run out of battery. When it is in low battery, a red LED will start to flash. 2) Some Bluetooth mobile phones, which have a problem with the Bluetooth implementation, will occasionally but not often, get into an Bluetooth shut-down status in unpredictable circu…

3, Introduction Introduction to Bluetooth Wireless Technology Bluetooth is a short range wireless communication technology. It allows wireless connections between Bluetooth devices such as cellular phone, personal digital assistant (PDA), desktop and notebook computer, input-output…

8, Planex BT-03HS Battery Information - New batteries - For first time use, plug the adapter into the Headset and charge it at least 4 hours until the red indicator turns off. - Battery care - Only qualified Service Centers are authorized to remove or replace the battery. - The rechargeable battery ha…

5, tones and the red indicator flashes quickly. Then the Headset is powered off. 3. The red indicator of Headset will flash slowly when battery low. Pairing Headset You are required to pair the Headset with your mobile phone or other devices before using it. Step 1: The Headset must be powere…

4, Getting Start Charging Battery The Headset comes with an embedded rechargeable battery. For first time use, it takes about 4 hours to fully charge the battery. Afterward, it takes about 2 hours to fully charge. With battery fully charged, the talk time is up to 2 to 4.5 max hou…