Plextor PL-MAN3 Operation Manual

11, Possible Causes and Solutions Device drivers need to be updated Contact your SCSI interface board/soundboard manufacturer and verify that the device drivers you have support your 4PleX drive. If they do not, you may be able to utilize ‘‘universal’’ device drivers, such as those included …

19, Symptom Additional Symptom • CDR103 -- Not High Sierra Format Occurs Regardless of the Discs Used Possible Causes and Solutions Hardware Conflict If the SCSI interface board uses DMA channels, try changing the selected DMA channel. Valid settings are normally Channel 1 or Channel 3. See …

1, Using CD-ROM Discs and Caddies YOUR TASK: Learn how to use a caddy and how to handle and care for your discs. YOUR OBJECTIVE: Protect your discs. Insert and eject caddies properly so your drive operates without interuption. YOUR METHOD: Practice loading discs into caddies, and caddies into drives…

8, Apple Computer Users: Read Section 13.3 ---- Apple Computers Technical Support If you still cannot solve your problem after reviewing the relevant sections of this chapter, please contact Plextor’s Technical Support Department. See Chapter 14 for information on how to prepare for, and the…

7, Troubleshooting YOUR TASK: Review some of the common problems you may encounter when installing or operating your 4PleX drive. YOUR OBJECTIVE: Gain a better understanding of how your drive operates. Attempt to prevent problems before they occur. Quickly fix, on your own, many simp…

10, Plextor PL-MAN3 cable. If you have a soundboard and CD-ROM drive, but lack an audio cable, contact one of the companies listed on page 65, or Plextor’s Technical Support Department, for information on where a cable can be purchased. Device drivers need to be updated If you can hear a music CD in your CD-ROM driv…