Plus M-12S Operation & User’s Manual

33, E-33 Meaning of Error Messages If any of the following flashing indications appear in the display window of the control panel, please check the matters described below. Error messages will flash for 5 seconds; however, error displays of “E4”, “E5” ,“E6”and “E8” will be lit…

26, E-26 When the copyboard is not going to be used, press the ON/Standby button and switch off the power (standby mode). • When the Erase Reminder function is set to "Enable" When the ON/Standby button is pressed, the display window and all the indi…

27, E-27 Drag to My Documents Saving Image Files on a Computer/Deleting Image Files Examples of operations follow for saving the image files in the USB memory device to the hard disk of the personal computer, and for deleting the folder when the USB memory capacity is full. (Ther…

29, E-29 For models M-12S and M-12W For model M-125 Making the Function Settings The copyboard includes such advanced functions as the Erase Reminder function that can be set directly using the operation buttons on the copyboard. The advanced functions can also be set from the functi…

21, Plus M-12S Printing When the copyboard is not going to be used, press the ON/Standby button and switch off the power (standby mode). • Switch off the printer power. • When the Erase Reminder function is set to…

25, E-25 Notice • The one screen portion that is viewable will be saved in USB memory. • Saving of the portion located around the sheet surface might not be possible. Please see “Effective reading size” on Page E-9. Continued on next page Press the Color button and se…