Plustek OpticPro A320 Usage And Maintenance Manual

11, USB Connector(s) If you don’t find such USB ports on your computer, then you need to purchase a certified USB interface card to add USB capabilities to your computer. INSTALLING AND SETTING UP THE SCANNER Please follow the step-by-step procedures described below to install the Pl…

27, CHAPTER IV. TROUBLESHOOTING If you encounter problems with your scanner, please review the installation and scanning instructions contained in this guide. Before you ask for customer service or repair, please refer to the information in this chapter and consult our FAQ (Frequently Asked…

25, Warning z To completely shut down the scanner, press the power switch on the side of the scanner. z If the scanner will not be used for a long period of time, shut down the scanner and then disconnect the power cable from the power outlet. To turn on the lamp again, simply pe…

16, CHAPTER II. SCANNING Your scanner needs to be driven by certain type of software program. Since all documents or images (whether text or pictures) that are acquired from the scanner are treated by your computer as images, most scanning will probably be done from an image-editing program where yo…

6, Plustek OpticPro A320 4. Damaged wire could cause fire or electrical shock. Keep the power cord straight and without being twisted, bended, or scraped. 5. Unplug this device if you don’t need to use it for a certain period of time, such as, during night or long weekend, to avoid any risks of causi…

19, 4. Adjust the scanning settings. 5. Click the Preview button. The scanned image should appear in the Preview Window. To define the margins and crop out sections of the image you don’t want scanned, use the mouse to click and drag the corners or sides of the scan area borders. Adjust th…