Plustek OpticPro A360 Usage And Maintenance Manual

20, Plustek OpticPro A360 set this scanner as the default scanning source. 5. Click the OK button to return to Readiris workspace. 2. Within Readiris Pro 10 Corporate Edition, click the Scan button located on the left side. 3. In the TWAIN window that opens, select Flatbed Reflective as the Scan Type. 4…

15, 2. Gently close the document cover. 3. Click the Windows Start button to launch NewSoft Presto! ImageFolio. 4. (If you have only one scanner connected with your computer, please skip to Step 5.) If you have more than one scanner or other imaging device installed on your computer: Clic…

6, and without being twisted, bended, or scraped. 5. Unplug this device if you don’t need to use it for a certain period of time, such as, during night or long weekend, to avoid any risks of causing fire. 6. Do not attempt to disassemble the scanner. There is danger of an electrical s…

22, Scan from the Buttons Scanning documents or images from this scanner is very easy. Follow the two steps described below: 1. Place the document or images onto the scanner. (Refer to “ Chapter II. Scanning ” of this guide for more information in placing paper on the flatbed glass properly.…

3, Table of Contents INTRODUCTION....................................................................................................1 How to Use This Guide............................................................................................... 1 Conventions of This Guide ...............…

28, APPENDIX A: SPECIFICATIONS 5 Plustek OpticPro A360 Resolution Optical Resolution: 600 dpi Max. Hardware Resolution: 600 x 1200 dpi Scan Modes Color: Input 48-it; Output 24-bit Grayscale: Input 16-bit; Output 8-bit Black & White: 1-bit Lamp Type Cold Cathode Flu…