Precision Power MaxxBass Owner's Manual

10, Precision Power MaxxBass WIRING CONFIGURATIONS The MaxxBass ® Processor is recommended in two different configurations. 1. Front Stereo Configuration The figure below illustrates the wiring for a front stereo configuration. One MaxxBass ® Processor is used between the front channel source and front spea…

8, SPECIFICATIONS Frequency 20hz-20kHz Signal-to-Noise Ratio >85dB Separation 65dB @ 1kHz Crossover Slope 24dB/octave Input Impedance 20,000 Ohms Input Sensitivity variable, 300mV to 3V peak to peak Output Level variable, 300mV to 5V peak to peak Supply Voltage 9 to 16 VDC INSTALLATION/MOUNTING NOTE…

15, When the Remote INTENSITY control is plugged into the MaxxBass ® Processor, the Remote INTENSITY control become active and the INTENSITY control on the MaxxBass ® Processor is disabled. This allows the user to install a remote control in a location different than the MaxxBass ® Processor an…

3, CONGRATULATIONS Thank you for choosing PrecisionPower TM audio equipment. At PrecisionPower TM we proudly design, engineer and manufacture audio products for aftermarket car audio. Our award winning engineering team utilizes innovative technology to consistently deliver Absolutely Stat…

16, SOUND IN ONE CHANNEL ONLY Reverse left and right RCA outputs for one band (i.e.-subwoofers) SOUND IS NOW IN OPPOSITE CHANNEL SAME CHANNEL Reverse RCA inputs Problem is in the amplifier, Speakers, or associated wiring of the silent channel. SOUND IS NOW IN OPPOSITE CHANNEL SAME CHANNEL …