PRESONUS STUDIO CHANNEL - V1.1 Operation & User’s Manual

11, CONTROLS AND CONNECTIONS 9 | PreSonus 2007 Mid Band Q. Sets the frequency range for the Mid Band EQ. The Frequency knob sets the center of this range. High Band Frequency. Sets the Center Frequency of the “Q” or frequency range width of the High Band EQ. You can adjust…

24, OPERATION 22 | PreSonus 2007 3.3.3 To Boost or Not To Boost….. With every instrument there are frequencies that can be attenuated or boosted to add clarity or fullness to it in the mix. And of course, there are frequencies that can make an instrument shrill, muddy, or ju…

17, OPERATION 15 | PreSonus 2007 3.2.3 Vocabulary of Dynamics Processors In scientific research, it is widely accepted that if one needs to master a subject quickly, learn the associated vocabulary and industry terms. The same is true with audio recording and production. Mos…

8, PRESONUS STUDIO CHANNEL - V1.1 CONTROLS AND CONNECTIONS 6 | PreSonus 2007 2.1 FRONT PANEL LAYOUT 2.1.1 Tube Microphone Preamp Instrument Input. The ¼” TS connector on the front panel is for use with a passive instrument (guitar, bass, etc.). When an instrument is plugged into the instrument input,…

15, OPERATION 13 | PreSonus 2007 Why do you need noise gates? Consider the compressed vocal example above and you now have a 20dB dynamic range for the vocal channel. Problems arise when there is noise or instruments in the background of the vocal mic that became more audible after the lower …

21, OPERATION 19 | PreSonus 2007 Stereo Mix Stereo Limiter. Just as the name implies, this is a hard limiter or ‘brick wall’ setting ideal for controlling the level to a 2 track mixdown deck or stereo output. Threshold Ratio Attack Release 5.5dB 7.1:1 0.001mS 98m…