Primera Accent Connectivity Manual

5, Optical Disc Laminator Connectivity Guide 1 Optical Disc Laminator Connection Guide THANK YOU… Thank you for purchasing the Optical Disc Laminator Connectivity Kit. This kit will allow you to use your Optical Disc Laminator in conjunction with the Pro, XL and MAX versions of Opti…

19, Optical Disc Laminator Connectivity Guide 15 F. TROUBLESHOOTING Problem Resolution Will not Laminate • Check Power to the Laminator • Make sure that the Ready LED is on and steady indicating the Laminator's Heat Roller has achieved normal operating Temperature I do not see an…

6, 2 Optical Disc Laminator Connectivity Guide e. Make certain the Laminator has been plugged into power and turned on. f. Connect the Laminator to your PCs USB port using the USB cable included with this kit. g. Select "Install Software Automatically" and click Next. 510887.qxd …

17, Optical Disc Laminator Connectivity Guide 13 c. Pick a disc using the Sequence and Pick buttons on the front control panel of the Duplicator. d. If the Laminator Tray is not in the OUT position, press the Laminate button to eject the Laminator Disc Tray. e. From the Main Application Screen clic…

11, Optical Disc Laminator Connectivity Guide 7 f) Tighten the Adjusting Screws on the front of the Laminator Stand to lock the stand in position. 9. You have now calibrated your Laminator to the Duplicator MAX and are ready to produce discs! D. CREATING DISCS WITH YOUR DUPLICATOR MAX IN PR…