PROLiNK Hurricane 8800P Operation & User’s Manual

9, 8 2.3 Hardware Installation The following steps instruct you to install the Hurricane 8800P for one computer. for more than four computers, please refer to 2.4 Network Connection. 1. Turn off the computer. 2. Plug the end of the Ethernet cable into any one connector marked 1 2 3…

28, 27 4.3 How to Configure DHCP Server. Select DHCP Server, then click Configure to configure the DHCP Server settings. Section Four: Configure the Bridge/Router …

12, 11 For Windows XP 1. Click the Start button and then Control Panel. From there, click the Network and Internet Connections icon. Then click the Network Connections icon. 2.Select the Local Area Connection icon for the applicable Ethernet adapter Double-click the Local Area Connection. Click the …

39, 38 Appendix D - EMC and Safety EMC - CE Mark Directive 89/336/EEC EN 55022:1998 Class B/CISPR22:1997 EN 61000-3-2: 1995 EN 61000-3-3: 1995 EN 55024: 1998 Safety - CE Mark Directive 72/23/EEC IEC950/EN 60950 Appendix D - EMC and Safety …

34, 33 A. For Internet Explorer, click Tools, Internet Options, and then the Connection tab. Make sure that Internet Explorer is set to Never dial a connection. B. For Netscape Navigator, click Edit, Preferences, Advanced, and Proxy. Make sure that Netscape Navigator is set to Direct con…

26, PROLiNK Hurricane 8800P 25 C. Add default Gateway to IP routes. If you uses static IP, have to add the default gateway (Provided by your ISP) to IP routes. Click IP routes, key in the gateway IP (provided by your ISP) to Gateway. Interface: leave blank. Click OK button. NOTE: Please remember to save the configuratio…