Promaster FL1 Operation & User’s Manual

9, INSTALLING BATTERIES Installing Batteries | 7 • Slide the battery chamber door in the direction of the arrow to remove it; • Insert the batteries in the orientations as indicated in the battery chamber; • Slide the battery chamber door back into place, in the opposite direction of the ar…

27, Slave Flash Setup | 25 SLAVE FLASH SETUP You can create a professional lighting setup by putting slave flash units into different groups to function as main, fill, accent, side, or other lights. Set the output power level of each group appropriately to achieve specific effects for your photograph…

17, Manual Mode | 15 (1) Press the MODE button until you reach the manual mode. The “M” indicator will show on the LCD. (2) Then press the “ + ” or “ - ” selector button to set your desired output. The setting will then be automati- cally saved into the internal memory. (3) Set your camera…

5, FEATURES Features | 3 • Auto and manual zoom from 24-28-35-50-70-85-105mm • TTL metering • Wireless TTL function • High speed synchronization • 7 levels of power ratio 1/1, 1/2, 1/4, 1/8, 1/16, 1/32 & 1/64 • 2” LCD Control Panel • Secondary fill fl…

26, Promaster FL1 24 | Wireless TTL Slave Operation To use this flash as Wireless TTL slave flash: (1) Make sure that the master flash or controller is on and set to TTL automatic mode. (2) Set the setting for each group of flash units in the master flash or controller. Assign the master to one of the channels…

25, Wireless TTL Slave Operation | 23 WIRELESS TLL SLAVE OPERATION The ProMaster FL1 is equipped with advanced wireless TTL flash feature, so that it can be used off camera while still maintaining full TTL control. Take a moment to familiarize yourself with the following terms in order to under…