Promise Technology SUPERSWAP 1600 Operation & User’s Manual

7, 1 Chapter 1: Introduction • About This Manual, below • Overview (page 2) • Specifications (page 3) • Key Features (page 3) • Check the Fit of Your SATA Disk Drives (page 4) Thank you for purchasing Promise Technology’s SuperSwap 1600 internal disk drive enclosure. About …

26, SsuperSwap 1600 User Manual 20 Troubleshooting is based on observing and analyzing LED colors. There are two LEDs on SuperSwap 1600: • Status – Reports specific disk drive conditions • Activity – Reports read and write activity on each disk drive The chart below lists th…

29, Chapter 3: Troubleshooting 23 Fan Replacement To replace a fan on the SuperSwap 1600: 1. Power down the PC. 2. Remove the SuperSwap enclosure from the PC chassis and turn it upside- down. 3. Remove the two mounting screws and lift the bottom cover off the SuperSwap enclosure. 4. Rem…

11, Promise Technology SUPERSWAP 1600 5 Chapter 2: Installation • Unpack your SuperSwap 1600 (below) • Install the Enclosure (page 6) • Install a Disk Drive (page 11) • Remove a Disk Drive (page 17) • View SuperSwap in WebPAM (page 18) Unpack your SuperSwap 1600 The SuperSwap 1600 box contains the following items: T…

18, SuperSwap 1600 User Manual 12 2. Carefully place a SATA or SAS disk drive into the drive carrier and slide it all the way to the back. 3. Install and tighten the four mounting screws to secure the disk drive in the drive carrier. 4. Slide the cover onto the drive carrier. …

22, SuperSwap 1600 User Manual 16 6. Carefully turn the drive carrier over and tighten the screws attaching the bracket. 7. Slide the cover onto the drive carrier. Install Drive Carrier into Enclosure 1. Carefully slide the drive carrier into the housing assembly with the handle turned out all t…