Propellerhead PX7 Operation Manual

10, Propellerhead PX7 PX7 FM SYNTHESIZER 10 Here is how the envelope generator works: • When you press a key on the keyboard, the level goes from level L4 to level L1 at the R1 rate. • When level L1 has been reached, the level starts to change to the L2 value at the R2 rate. • When level L2 has be…

8, PX7 FM SYNTHESIZER 8 Op Feedback In addition to the Algorithm selector is the Op Feedback knob. All algorithms have one operator with a feedback connection (signal routed back to the operator’s input), the Op Feedback knob sets the feedback amount. Range: 0-7 • Increasing the Op Feedback…

13, PX7 FM SYNTHESIZER 13 D With the Delay knob you set the time it should take for the LFO to apply modulation after you hit a key. D Select LFO waveform by clicking the up/down buttons above the Waveform display. D Set the desired pitch modulation depth with the LFO to Pitch knob. Th…

11, PX7 FM SYNTHESIZER 11 Since the timbre of frequency modulated sounds can vary a lot depending on where on the keyboard you play, it is necessary to be able to scale the envelope generator’s modulation amount differently across the keyboard - especially for operators that work as modulators in …

5, PX7 FM SYNTHESIZER 5 Using PX7 Loading and saving patches Loading and saving patches is done in the same way as with any other internal Reason/Reason Essentials device - see the “Sounds and Patches” chapter in the Reason/Reason Essentials Operation Manual pdf for details. Using…