Psiber Data Systems NETWORK IP TESTER Operation & User’s Manual

6, PORT ID SCREEN Pressing the PortID function key in the Link Screen presents the Port ID Screen. As soon as this screen appears, the Pinger begins transmitting a pattern of Link signals that will cause the hub,switch or NIC Link LED to blink or stay on continuously. Identifying the specific por…

5, Psiber Data Systems NETWORK IP TESTER DHCP SCREEN Pressing the DHCP function key in the Link Screen presents the DHCP Screen and begins the DHCP client-server test. Note: The MAC Address of the Pinger may have to be added to the Access List of the Default Gateway for the Pinger messages to be accepted - see your System …

7, The information is retained even if the unit is turned off or the batteries are removed. To remove an entry from the list, press the right cursor key to select the entry and then press the star key. A Delete Entry message is displayed and pressing the SAVE function key clears the selected …

3, OPERATION To test a hub or switch, connect a patch cable from the RJ-45 port on the equipment to the RJ-45 jack marked LAN on the Pinger. To test a NIC or most routers, connect a patch cable to the RJ-45 jack marked NIC on the Pinger. LINK SCREEN Turn on the Pinger by …

2, BOX CONTENTS _ Pinger Network IP Tester _ AC Adapter _ Four AA Alkaline Batteries _ User Guide BATTERY The Pinger operates on four AA alkaline batteries. Remove the battery cover at the back of the unit and insert the batteries with the orientation as shown. Battery polarity is marke…