Python Responder LC Model 991 Installation Manual

57, 57 © 2008 Directed Electronics. All rights reserved. 7 flashes Timer mode/Turbo mode/Manual mode error * 8 flashes Neutral safety shutdown 9 flashes Low battery (voltage mode) 10 flashes Alarm triggered ** 11 flashes Wait-to-start input timed out * Timer mode error: Ignition is…

60, 60 © 2008 Directed Electronics. All rights reserved. section of this guide. Status LED doesn’t work.s Is it plugged in? (See Plug-In LED and Valet/Program Switch section of this guide.) Is the LED plugged into the correct socket? Door locks operate backwards. s This unit has easily-reve…

38, Python Responder LC Model 991 38 © 2008 Directed Electronics. All rights reserved. For more information about the remote control functions, see the Owners Guide. Button Level Direct Access x 1 x 2 x 3 x 4 ARM/LOCK (Panic) SILENT ARM SENSOR BYPASS SILENT ALARM SENSORS SILENT ALARM ALL ZONES DISARM/UN- LOCK (Panic) SILENT D…

24, 24 © 2008 Directed Electronics. All rights reserved. Remote start input - 5-pin connector 1 BLACK/WHITE (-) NEUTRAL SAFETY SWITCH INPUT Connect this wire to a ground source if installing this unit in an automatic trans- mission vehicle. If this unit is being installed in a manual tran…

55, 55 © 2008 Directed Electronics. All rights reserved. Long term event history The system stores the last two full triggers in memory. These are not erasable. Each time the unit sees a full trigger, the older of the two triggers in memory is replaced by the new trigger. To access long te…

40, 40 © 2008 Directed Electronics. All rights reserved. Note: Some features have more than two possible settings. Pressing or toggles through the two-chirp and higher settings. Once a feature is programmed: Other features can be programmed within the same menus Another menu can be selecteds…