Super Circuits BLK-SY10 Series Systems Setup Manual

35, 33NVR and hDVR Systems Setup Guide APPENDIX D: CONFIGURE THE SC BLACK CAMERA IP ADDRESS APPENDIX D Congure the SC Black Camera IP Address 1. Open the Windows directory where you installed IPAdmin Tool. Double click IPAdminTool.exe to start the application. When the IPAdmin…

6, 4 www.sc-black.com SECTION 2: GETTING STARTED: UNPACKING YOUR SYSTEM SECTION 2 Getting Started: Unpacking Your System For most installations, SC Black NVR and hDVR systems come with everything needed to install and operate your surveillance system. 2.1 Unpacking the equipment Remove…

25, 23NVR and hDVR Systems Setup Guide SECTION 3: SYSTEM SETUP 5. After selecting the new camera name, click the Input button in the keyboard window. The keyboard window will close. 6. To save the entry, click Close in the Camera tab. 3.11 Export system conguration Although catastro…

8, 6 www.sc-black.com SECTION 3: SYSTEM SETUP 3.1 Check LAN for default IP address compatibility All IP devices (computers, cameras, encoders, etc.) are initially setup with factory default network settings. Some devices are preset with xed (static) IP address, while others acquire their netwo…

21, 19H.264 Network IP Camera User Manual SECTION 3: SYSTEM SETUP 4. Click OK to Search in Network and open the IP Device List. 5. In the IP Device List window, select the type of devices attached to the network that you want to add, or select ALL DEVICES, then click Next. The network se…

24, Super Circuits BLK-SY10 Series Systems 22 www.sc-black.com SECTION 3: SYSTEM SETUP NOTE Video from the camera will not appear until the Cameras tab is closed and the server is restarted. Add other IP devices to the system as needed before restarting. 10. Repeat steps 2 through 9 above to add other IP cameras (devices) t…