Supermicro X9DR7-LN4F Operation & User’s Manual

101, Chapter 4: AMI BIOS 4-27 4-5 IPMI Select the IPMI (Intelligent Platform Management Interface) tab to access the fol- lowing submenu items. IPMI Firmware Revision This item indicates the IPMI rmware revision used in your system. IPMI Status This item indicates the status of the IPMI…

107, A-1 Appendix A: BIOS POST Error Codes Appendix A BIOS Error Beep Codes During the POST (Power-On Self-Test) routines, which are performed at each system boot, errors may occur. Non-fatal errors are those which, in most cases, allow the system to continue to boot. The error mess…

82, Supermicro X9DR7-LN4F 4-8 X9DR7-LN4F/X9DR7-LN4F-JBOD/X9DRE-LN4F Motherboard User’s Manual Intel® Virtualization Technology (Available when supported by the CPU) Select Enabled to support Intel Virtualization Technology, which will allow one platform to run multiple operating systems and applic…

83, Chapter 4: AMI BIOS 4-9 CPU C6 Report (Available when Power Technology is set to Custom) Select Enabled to allow the BIOS to report the CPU C6 State (ACPI C3) to the operating system. During the CPU C6 State, the power to all cache is turned off. The options are Enabled and Disabled. CPU C7 …

49, Chapter 2: Installation 2-25 Power Button OH/Fan Fail LED 1 NIC1 LED Reset Button 2 HDD LED Power LED Reset PWR Vcc Vcc Vcc Vcc Ground Ground 1920 Vcc X Ground NMI X Vcc PWR Fail LED NIC2 LED A B DM1 JPG1 JBT1 J21 JTPM1 JIPMB1 FANB FAN4 FAN2 FAN1 JI2C1 JI2C2 JBAT1 JSD1 J22 JPW2 JPI…

95, Chapter 4: AMI BIOS 4-21 Out-of-Band Management Port The feature selects a serial port used by the Microsoft Windows Emergency Management Services (EMS) to communicate with a remote server. The options are COM1 and COM2. Terminal Type This feature allows the user to select the target terminal…