Supero X7DA3+ Operation & User’s Manual

18, 1-12 X7DA3+ User's Manual External Wake-On-LAN Wake-On-LAN is defi ned as the ability of a management application to remotely power up a computer that is powered off. Remote PC setup, up-dates and asset tracking can occur after hours and on weekends so that daily LAN traffi c is kep…

127, (Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform…

75, Chapter 4: BIOS 4-17 Mode This feature allows you to specify the parallel port mode. The options are Output only, Bi-Directional, EPP and ECP. DMA Channel This item allows you to specify the DMA channel for the parallel port. The options are DMA1 and DMA3. Floppy Disk Controller This …

13, Chapter 1: Introduction 1-7 Onboard I/O • Adaptec AIC-9410W SAS Controller w/HostRAID support (RAID 0, 1,10) • Intel ESB-2 South Bridge supports 6 SATA connectors (w/RAID 0, 1, 5,10) (For the Windows OS only) • One SIM Low Profi le IPMI slot • Intel 82563EB Gigabit Dual-Port…

89, Supero X7DA3+ A-5 Appendix A: BIOS POST Messages Press <F1> to resume, <F2> to Setup, <F3> for previous Displayed after any recoverable error message. Press <F1> to start the boot process or <F2> to enter Setup and change the settings. Press <F3> to display the pr…

121, Appendix D: Confi guring Intel HostRAID and the Windows OS D-9 Resetting to Non-RAID and Resetting a RAID HDD 1. From the main menu, select item3-Reset Disks to Non- RAID, and press <Enter>. The following screen will appear: 2. Use the <Up Arrow>, <Down Arrow>…