Swim'n Play 7” XL Assembly Instructions Manual

20, 6" & 7" TWO-PIECE FULL CONTOURED COVER Slide inside cover (the cover which will be closest to the inside of the pool) into position and place outside cover onto top of inside cover aligning the holes together with cage nut attached to the top plate and secure using the …

11, CLOSING THE WALL 4 Overtightening the nuts could cause the screws to fracture which could result in pool failure. Failure to tighten the nuts sufficiently could also resul…

9, PREPARING THE GROUND 1 Your pool must be installed on a solid level surface. Drive a stake into the ground at the center of your pool location. Use a length of string tied to the center stake, see clearance chart for your size pool, and mark…

15, EZ HOOK LINER INSTALLATION ATTENTION: An 8 inch cove must be placed all around the inside of the pool POOL WALL OUTSIDE VIEW OF POOL WALL COVE 8” 8” OPTIONAL WALL GUARD 12” 12” 1. Clear all sticks and sharp objects from an area near t…

22, Swim'n Play 7” XL 7" XL TWO-PIECE WRAP AROUND COVER AND PEDESTAL 1 - Insert the logo into the cover. 2 - Slide the outside cover into position and align the hole in the cover with the cage nut attached to the top plate. Secure using the 1/4�…

8, INSTALLATION • ASSEMBLY STEPS READ CAREFULLY BEFORE STARTING POOL ASSEMBLY CONSTRUCTION CLOSE-UPS Use the illustrations below as a guide for the assembly of your pool 7” XL POOLS with Column Vertical & Wrap Around Covers DELUXE POOLS with Column Vertical & Wrap Around Co…