K-9 K9-5 Classic Installation Manual

17, Page - 17 Negative Instant Trigger Input Blue Wire The Blue wire is a Negative instant trigger used primarily to detect entry into the hood or trunk area of a vehicle. The function of this circuit is to activate the security system (sounding the siren and flashin…

8, K-9 K9-5 Classic Wiring an optional Relay for Trunk Release. 2nd Channel / Trunk Release Output Gray Wire The function of the Gray wire is to provide an optional output, the primary use being trunk release. Press and hold the transmitter's small right button for two seconds to…

9, Page - 9 Positive Siren Output Brown Wire HORN CONNECTION: The Brown wire may be connected to the vehicle's existing horn wire, but a relay and diode must be used to switch the polarity to Negative. The horn switch wire is typically found at th…

1, COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT, INC. 2000 MODEL: K9-5 Classic Page - 36 Programming Transmitters Each system includes two pre-programmed transmitters. To program transmitters, such as when adding a transmitter or changing the button assignment, follow this process: Step 1- Turn…

10, more than the 1 amp output that the Brown wire supplies. One alternative is to disconnect the horns, then operate the horn switch. A clicking sound from the vehicle will confirm the presence of a horn relay. Another alternative is to check a wiring schematic of the vehicle in …