E-Guard IC502w Operation & User’s Manual

45, E-Guard IC502w Appendix B. Maximum Allowed Video Users The maximum allowed video users for a single IC502w camera at the same time is dependent on the video settings including “Internet speed” and resolution. The followings are the summary of the maximum allowed video users: 1. When au…

8, E-Guard IC502w 2. Hardware description and quick installation/usage The IP CAM is designed to be very easy to install and use. First, let’s see the major components of the IP CAM products. 2.1. Major hardware components. The major components on the front panel of the IP CAM products are…

38, E-Guard IC502w 3.16. Safe Mode If by some abnormal operation, for example, powered off during the critical point of the upgrade procedure, the IP CAM will enter into the safe mode. In this mode, you will see the following “Safe mode” page when login into this IP CAM. Pleas…

19, E-Guard IC502w 3.3. Network The Network page allows you to modify the network settings of the wired Ethernet. The default settings use DHCP to obtain an IP address automatically. In most of the home and office network environment, there is a DHCP server running. In this situation, by u…

40, E-Guard IC502w 4. Features and specifications 4.1. Features ¾ Easily access the camera from anywhere in the world via the ID/password ¾ No complicated NAT/router settings needed. ¾ Free video management software - CamView program accompanied for easy access and multi-camera…

13, E-Guard IC502w E-Guard IC502w 2.3. Wireless connection The IP CAM can also be connected to the home/office network through the 802.11 b/g wireless connection. There are only three things that you need to do to have the wireless connection: 1. Set the WiFi security settings on the web configuration page. …